STV CNC Optimum software

Don't see your table manufacturer listed above? Post here in this forum.
Post Reply
Gogo
1.5 Star Member
1.5 Star Member
Posts: 46
Joined: Fri Nov 04, 2022 11:02 pm

STV CNC Optimum software

Post by Gogo »

Was going to delete but can't figure out how. They are now taking care of things
Last edited by Gogo on Thu Sep 21, 2023 2:57 pm, edited 1 time in total.
tcaudle
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1337
Joined: Tue Feb 28, 2012 6:47 pm

Re: STV CNC Optimum software

Post by tcaudle »

Unless its changed they use the MyPlasma Controls and their software. The support form Hungary is not all that great so they may be having trouble figuring it out. I don't know what the "Optimum " software is but the good news it has to be cheap of they would not offer it.

What drawing format are you getting gout of Optimum to feed to SheetCAM? The drawing should be what the drawing is and then SHeetCAM should generate the G-code and the machine should follow it . I don't know how you have the axis setuip and where you x0y0 point is but SheetCAM has to know where that is when it generates the G-code yo orient things right.

You are welcome to join my Suppiort Forum . We don't sell the MyPlasma stuf or use their software . But we do have years of experience with G-code and POST processors and getting stuff to cut .

we require you join to trap out the spammers . Its painless.

https://www.candcnc.com/supportforum/index.php
Gogo
1.5 Star Member
1.5 Star Member
Posts: 46
Joined: Fri Nov 04, 2022 11:02 pm

Re: STV CNC Optimum software

Post by Gogo »

Edited to delete, not fair to supplier, they are making a good effort.
Last edited by Gogo on Thu Sep 21, 2023 2:58 pm, edited 1 time in total.
weldguy
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1880
Joined: Fri Apr 17, 2009 11:48 am

Re: STV CNC Optimum software

Post by weldguy »

Sounds like a bug in the software to me if you do a rotate or reset and your previous settings are replaced. Likely not much you can do until they get it resolved.
Gogo
1.5 Star Member
1.5 Star Member
Posts: 46
Joined: Fri Nov 04, 2022 11:02 pm

Re: STV CNC Optimum software

Post by Gogo »

Update, it's running very well now. they did an update to the software and have a complete manual now so I was able to tune it and very happy with the results now. It was a bumpy road at the start but over all I am now very satisfied with the machine.
weldguy
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1880
Joined: Fri Apr 17, 2009 11:48 am

Re: STV CNC Optimum software

Post by weldguy »

Great to hear. Thanks for posting back.
Post Reply

Return to “Various Manufacturers Forum”