Cutting Edge Plasma

Don't see your manufacturer? Post here and if we get enough action on that manufacturer we will add a forum
Post Reply
james1012
Posts: 1
Joined: Wed May 02, 2018 6:48 am

Cutting Edge Plasma

Post by james1012 » Wed May 02, 2018 7:10 am

I have not found a lot of info about these tables. anybody have one?

Thanks

IUCTX
Posts: 6
Joined: Wed Sep 05, 2018 5:25 pm

Re: Cutting Edge Plasma

Post by IUCTX » Wed Sep 05, 2018 6:10 pm

james1012 wrote:I have not found a lot of info about these tables. anybody have one?

Thanks
I am currently dealing with them, horrible experience.

RDillon
Posts: 7
Joined: Sun Jan 27, 2019 2:27 pm

Re: Cutting Edge Plasma

Post by RDillon » Tue Feb 19, 2019 12:18 pm

IUCTX, Can you elaborate on your experience? Thanks

cpbill
Posts: 1
Joined: Sat Mar 02, 2019 1:51 pm

Re: Cutting Edge Plasma

Post by cpbill » Wed Mar 27, 2019 12:52 pm

I just received mine nice table tech support is good.

skilbourn
Posts: 2
Joined: Sat Jun 15, 2019 7:09 pm

Re: Cutting Edge Plasma

Post by skilbourn » Sat Jun 15, 2019 7:21 pm

We bought one of their tables in disassembled form and are working on getting it put together. If you buy from them have them assemble it as the instructions are really crude and missing a lot of information.
Support is spotty. I have sent emails asking questions and got an immediate answer and I have been ignored completely. I did not have much luck calling; always got voicemail and no return call.
The table that we ordered was 6weeks late on the 4week lead time that he gave us. I think he is completely overwhelmed with business. The design of the table is reasonable and I think it will work as a starting point. I'm guessing that we will need to go heavier at some point.

ZKB
Posts: 5
Joined: Sun Apr 14, 2019 8:22 pm

Re: Cutting Edge Plasma

Post by ZKB » Mon Jun 17, 2019 8:12 pm

I have had my table for a week. It took 5 weeks to get it I was promised 3 to 5 weeks lead time. I agree that the instructions are not great but it is very simple to put together and wire. Support from Matt is spotty and I agree that he is probably overwhelmed.
I think for a starter table it should be good to get in the cutting game.

RDillon
Posts: 7
Joined: Sun Jan 27, 2019 2:27 pm

Re: Cutting Edge Plasma

Post by RDillon » Wed Jun 26, 2019 8:15 pm

I bought a 4x8 from him. Assembled. I think y'all are right. Matt is most assuredly overwhelmed at times, I believe he is probably doing more than one man can do. I feel like we've all been there before! Anyway, my table is fine, works fine, this is all new to me as well, but I am getting some work done with it. I can't remember exactly, but I've probably had mine since April. Mostly weekend work so far. Randy

ktkamm
Posts: 7
Joined: Thu Jan 17, 2019 4:43 pm

Re: Cutting Edge Plasma

Post by ktkamm » Tue Jul 16, 2019 7:51 am

Does this table run on Mach 3 software? Thanks

ZKB
Posts: 5
Joined: Sun Apr 14, 2019 8:22 pm

Re: Cutting Edge Plasma

Post by ZKB » Wed Jul 17, 2019 7:20 pm

I can't remember the name right now But it is on there web sie

RDillon
Posts: 7
Joined: Sun Jan 27, 2019 2:27 pm

Re: Cutting Edge Plasma

Post by RDillon » Sat Jul 20, 2019 10:12 am

ktkamm wrote:
Tue Jul 16, 2019 7:51 am
Does this table run on Mach 3 software? Thanks
It is my understanding that it used to be Mach 3, but mine isn't. New software. It is IPlasma, I believe. This is my first experience with any of it, so I can't compare to Mach3...

tcaudle
Elite Contributing Member
Elite Contributing Member
Posts: 1146
Joined: Tue Feb 28, 2012 6:47 pm

Re: Cutting Edge Plasma

Post by tcaudle » Mon Jul 22, 2019 8:11 pm

Its a MyPlasmaCNC system product from Proma...the people in Poland that brought you the Compact Proma 150 THC and the Proma SD. Bare bones BOB and integrated THC with built in ohmic sense. free software. Max 4 motors , two aux outputs, USB to PC for interface (not Ethernet) . USB to THC remote pickup module . 5 page installation manual . 9 page software manual. WIN 7 - 10 only. No router, No oxy fuel, no engraving/plate marker support.

Builder supplies 24V power for the Proma module and separate power for motors and drivers.

ktkamm
Posts: 7
Joined: Thu Jan 17, 2019 4:43 pm

Re: Cutting Edge Plasma

Post by ktkamm » Wed Jul 24, 2019 8:43 am

Thanks for the info.

Hjammer
Posts: 9
Joined: Mon Jun 10, 2019 9:43 am

Re: Cutting Edge Plasma

Post by Hjammer » Wed Aug 21, 2019 10:42 am

ktkamm wrote:
Tue Jul 16, 2019 7:51 am
Does this table run on Mach 3 software? Thanks
Matts tables use
MyPlasm CNC from
https://www.proma-elektronika.com/

Hjammer
Posts: 9
Joined: Mon Jun 10, 2019 9:43 am

Re: Cutting Edge Plasma

Post by Hjammer » Wed Aug 21, 2019 10:46 am

I am working with Matt to purchase a new 4x4 table now. He provided some local users so that I can go and see the table in action and talk with the owner/user. I looked at the XCrossfire, Wright, Delusional Designs, and several other tables and so far this is the most promising from what I have found. A big perk is that Matt is "local" (2 hours from me).

I will update as I move forward.

Piechow
Posts: 12
Joined: Wed Jul 31, 2019 9:40 pm

Re: Cutting Edge Plasma

Post by Piechow » Wed Aug 28, 2019 9:07 pm

Why do I keep clicking on stuff, yet another table in the $5k range for me to ponder.. It seems like all of the tables in this bracket share similar disadvantages.

Hjammer
Posts: 9
Joined: Mon Jun 10, 2019 9:43 am

Re: Cutting Edge Plasma

Post by Hjammer » Fri Sep 06, 2019 11:58 am

Piechow wrote:
Wed Aug 28, 2019 9:07 pm
Why do I keep clicking on stuff, yet another table in the $5k range for me to ponder.. It seems like all of the tables in this bracket share similar disadvantages.
I had the same problem I finally bit the bullet so to speak and ordered from Matt, I get my table in about 3 weeks. I have talked with him about all the feedback I read through and it sounds like he has or is willing to address anything that comes up. We will see soon enough.
Midwest Native
Cutting Edge 4x8 water table
HT PM 45XP
To do list thats 45 pages long

Post Reply

Return to “Various Manufacturers”

Easyscriber engrave attachment for Hypertherm plasma cutters.