It is currently Wed Nov 21, 2018 3:02 am

Easyscriber engrave attachment for Hypertherm torch's
 

Need ideas on moving my table

Have a question and don't see your manufacturer? Post here and if we get enough action on that manufacturer we will add a forum
Jeepn2
Posts: 34
Joined: Sat Apr 05, 2014 11:16 am
Location: SE Oklahoma

Need ideas on moving my table

Postby Jeepn2 » Fri Jun 29, 2018 8:06 am

I recently built a new shop and need to move my 4X8 table approx 125 yards, I have a tractor with front end loader and some 2X3 tubing I thought about using underneath for support. I will probably remove the slats to reduce the weight and use slings for lifting. Any ideas on this and what to be aware of when moving?
JC
Precision Plasma Patriot 4X8, Proma THC (if I can get it working), Floating head
Hypertherm 45 - hand torch
Mach3, Sheetcam, Inkscape/Corel X5
Lincoln Squarewave 175 tig, Miller 185 Autoset
Southbend Heavy 10X48 lathe
Bridgeport 9X42
Grizzly Mill/Drill

User avatar
acourtjester
Elite Contributing Member
Elite Contributing Member
Posts: 3223
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: Need ideas on moving my table

Postby acourtjester » Fri Jun 29, 2018 9:52 am

I would use the points where the legs are attached to attach the sling to, these being the support points for keeping the table's shape.
It would also help to have some method to absorb any movement shock that would be transmitted from the tractor during the trip.
DIY 4X4 Plasma/Router Table
CandCNC DTHC-IV & Feather Touch
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PM 256 tig

Jeepn2
Posts: 34
Joined: Sat Apr 05, 2014 11:16 am
Location: SE Oklahoma

Re: Need ideas on moving my table

Postby Jeepn2 » Sun Jul 01, 2018 11:50 pm

Thanks for the input,
I will be moving it this next week, hope it goes as planned.

Have a good week and Happy 4th!
Precision Plasma Patriot 4X8, Proma THC (if I can get it working), Floating head
Hypertherm 45 - hand torch
Mach3, Sheetcam, Inkscape/Corel X5
Lincoln Squarewave 175 tig, Miller 185 Autoset
Southbend Heavy 10X48 lathe
Bridgeport 9X42
Grizzly Mill/Drill


Return to “Various Manufacturers”

Who is online

Users browsing this forum: No registered users and 3 guests

Easyscriber engrave attachment for Hypertherm torch's