I try to contact sales dep but no answers.

Torchmate Hardware discussion forum
Post Reply
titaneman
1/2 Star Member
1/2 Star Member
Posts: 7
Joined: Fri Apr 08, 2011 7:11 pm
Location: Gatineau

I try to contact sales dep but no answers.

Post by titaneman »

Hi guys, I try to contact sales dep since monday but I don't have any answers
so this is my questions if some torchmate people see it:

I need to re-quote a table, I start my business plan to present to my bank and development Canada
So this is what I want to put in my plan:

1-Torchmate 3 gantry kit 5?X10?
2-Arc volt height control unit
3-Automatic Tube Cutting Side Mount Attachment
4-torchmate universal interface
5-single face cable
6-plate marker
7-Cable carrier for 5?x10? table
8-laser cross hair
9-routing drilling package (automated z axis) I don?t know if it?s the same as avhc (the motor is already in place)?
10-remote pendant
11-prob sensor option

Ok so I have a little questions
1-you supply plans to build the table so the side tube cutter installation is take in consideration?
2-can you supply the plans to build water table?
3-If I want to build a table to receive a 20? pipe, what is the difference in price (probably need rail extra and cable carrier)
4-can I use the same torch for table and side mount tube cutter?
5-Do you have a price approx for material to build table 5?x10? or 5?x20?
6-am I able to use marker with the side mount tube cutter?
7-Do you have any video or tech about probe sensor.

Thanks for your time with me and have a nice day

(just before I purchase the table(probably near December or january), I call you to make sure I have all I want)

Eric Rossignol

titaneman2000@videotron.ca
GOGO-C
1/2 Star Member
1/2 Star Member
Posts: 1
Joined: Sat Oct 29, 2011 3:19 am

Re: I try to contact sales dep but no answers.

Post by GOGO-C »

They Close at 4 pm mountain time. Also SEMA show in Las Vegas is Monday. I know they are going. Hope this helps. :D
Post Reply

Return to “Torchmate Forum”