It is currently Tue Nov 13, 2018 3:26 pm

 

torchmate 2 x 4

Torchmate Hardware discussion forum
[email protected]
Posts: 2
Joined: Wed Nov 17, 2010 5:39 pm

torchmate 2 x 4

Postby [email protected] » Mon Mar 21, 2011 1:55 pm

Hello,

I am interested if there is any feedback on the Torchmate 2 x 4 machine. I am new to the board, and would like to get more involved with metal cutting. Any feedback, good or bad would be appreciated.
Thanks,
Mike

aicomp
Elite Contributing Member
Elite Contributing Member
Posts: 229
Joined: Wed Feb 02, 2011 5:15 pm
Location: Susanville, California
Contact:

Re: torchmate 2 x 4

Postby aicomp » Mon Apr 11, 2011 9:10 pm

Hi,
There is a Torchmate board on Pirate 4X4 that has a lot of 2X4 info. Between this one and Pirate, you will find all you need. Here is the link:
http://www.pirate4x4.com/forum/forumdisplay.php?f=125
Hope this helps.
Mike
http://www.PenningtonFab.com
Torchmate 3 with AVHC
Hypertherm 1250
Lincoln V205T Tig
Lincoln wirematic 250
Eastwood 175 with Spoolgun
Eastwood 135 Mig

jdh239
Elite Contributing Member
Elite Contributing Member
Posts: 196
Joined: Tue Jan 11, 2011 4:09 pm
Location: Payson, Utah

Re: torchmate 2 x 4

Postby jdh239 » Tue May 31, 2011 12:44 am

I have a 2x4. Anything you want to know about it? I have posted a lot of youtube vids on it. Search for jdh239
----------------------------------------
ColdCreekWorks.com


Return to “Torchmate”

Who is online

Users browsing this forum: No registered users and 2 guests

Easyscriber engrave attachment for Hypertherm torch's