Linear rail

Torchmate Hardware discussion forum
Post Reply
Jdw652
1 Star Member
1 Star Member
Posts: 15
Joined: Tue Jul 01, 2014 10:34 am

Linear rail

Post by Jdw652 »

hi I am wanting to upgrade my TM2 to have a router and plasma but the liner rail is not long enough on my gantry to accept 2 cassettes and have range of motion of 48" for each. Does any one know where I can get a longer rail in north America or for that matter sent to north America? I have 2 cassettes one for the plasma and one for the router and when I approached torchmate they said that a 60" rail is just over $1000 USD. So that would be close to $1500CDN to get it to me.
User avatar
runninwild400
2.5 Star Elite Contributing Member
2.5 Star Elite Contributing Member
Posts: 148
Joined: Wed Oct 15, 2008 5:24 pm
Location: Ontario Canada

Re: Linear rail

Post by runninwild400 »

https://8020.net/

Think that's where TM gets their rails.
Brian
Metal-Magic
joepatty
1/2 Star Member
1/2 Star Member
Posts: 8
Joined: Tue Feb 15, 2011 8:33 am

Re: Linear rail

Post by joepatty »

I think I found linear motion slides that torchmate uses here is the link https://www.mcmaster.com/linear-motion- ... dth~32-mm/
Jdw652
1 Star Member
1 Star Member
Posts: 15
Joined: Tue Jul 01, 2014 10:34 am

Re: Linear rail

Post by Jdw652 »

thanks
Post Reply

Return to “Torchmate Forum”