Y gantry noice

Torchmate Hardware discussion forum
Post Reply
STEEL3470
2 Star Member
2 Star Member
Posts: 77
Joined: Mon Aug 22, 2011 2:56 pm

Y gantry noice

Post by STEEL3470 »

Ok I have a 2x4 torchmate. The problem only happens going in the negative y direction. It is noisy screatch. It is well lubed bearings seem fine. Tool holder nice and tight to rail no movement. Felt spindle and seems ok no burs. Called tech support and they said to take it all apart and see what it looks like. Is there any input or ideas before I do that
Post Reply

Return to “Torchmate Forum”