Node Editing

Torchmate Hardware discussion forum
Post Reply
Carlton
1/2 Star Member
1/2 Star Member
Posts: 7
Joined: Wed Nov 09, 2011 1:42 pm

Node Editing

Post by Carlton »

I have been using the node editing function for years (ver. 8.0) and it seems to have stopped working??? When I get to the point of editing a newly scanned image and click on the line to make the nodes appear, nothing happens. I have read the manual for node editing several times and still am no closer to a solution. Hope someone has an idea or more for me.
adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 8599
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: Node Editing

Post by adbuch »

It is possible that some of the files specific to your editing software have become corrupt. I would consider doing a fresh install of your software program and perhaps this will remedy your problem. I know I had something similar happen with one of my design programs and doing the fresh install fixed the problem.
David
Post Reply

Return to “Torchmate Forum”