I found a plasmacam forsale very nearby, at a great deal.
The software cd says 2008 (dont recall version, 2.03 or something like that)
the DHC isnt DHC2.
comes with laptop and Hypertherm 1000 G3.
A friend of mine has v3.11 if i can use it on this one. So I dont think that would be a problem.
My question is, what all would it cost me to install any of the other upgrades?
I know about the 'transfer of ownership' stuff. He's the 2nd owner, so he is looking into clearing that up with the original.
Mechanically, its a sound machine.
Plasmacam 2007model, super deal, but no upgrades?
- Complete_Loser
- 2.5 Star Member
- Posts: 129
- Joined: Sat Dec 26, 2009 1:10 pm
- Location: Indiana (central)
Plasmacam 2007model, super deal, but no upgrades?
You want it done cheap and fast, it wont be right.
You want it done right and fast, it wont be cheap.
You want it done right and cheap.., come back in a year..
You want it done right and fast, it wont be cheap.
You want it done right and cheap.., come back in a year..
- djreiswig
- 4.5 Star Elite Contributing Member
- Posts: 1942
- Joined: Thu Nov 19, 2015 10:02 pm
- Location: SE Nebraska
Re: Plasmacam 2007model, super deal, but no upgrades?
There are a few posts in the plasmacam section that have the info you're searching for. Have a look around or try the search.
Here's just one.
viewtopic.php?f=61&t=31453
Here's just one.
viewtopic.php?f=61&t=31453
2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
-
- 6 Star Elite Contributing Member
- Posts: 8683
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: Plasmacam 2007model, super deal, but no upgrades?
Are you asking about mechanical upgrades or software?Complete_Loser wrote: ↑Mon Dec 06, 2021 9:10 pm
My question is, what all would it cost me to install any of the other upgrades?
David
-
- 6 Star Elite Contributing Member
- Posts: 8683
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: Plasmacam 2007model, super deal, but no upgrades?
OK. I see you have created a new post with your specific questions. Linked to below.adbuch wrote: ↑Mon Dec 06, 2021 10:28 pmAre you asking about mechanical upgrades or software?Complete_Loser wrote: ↑Mon Dec 06, 2021 9:10 pm
My question is, what all would it cost me to install any of the other upgrades?
David
David
viewtopic.php?f=61&p=203372#p203372