I have a second P.C with just the D.E software and it is being replaced (I.T forced....) Question is how do I move it to the new computer?
Help...
Thanks all!!!
Moving DesignEdge software to new P.C?
-
- 2 Star Member
- Posts: 81
- Joined: Wed Jan 07, 2015 7:15 pm
- Location: North Central Texas.
-
- 6 Star Elite Contributing Member
- Posts: 8624
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: Moving DesignEdge software to new P.C?
You will need to contact Plasmacam.
David
PlasmaCAM technical support can be reached by phone, fax or email as shown:
Phone: (719) 676-2701
Fax: (719) 676-2711
Or contact us by email: support[year]@plasmacam.com
However, technical support for USA and Canada is provided by telephone only.
International customers may use email or fax if telephone support is not practical.
David
PlasmaCAM technical support can be reached by phone, fax or email as shown:
Phone: (719) 676-2701
Fax: (719) 676-2711
Or contact us by email: support[year]@plasmacam.com
However, technical support for USA and Canada is provided by telephone only.
International customers may use email or fax if telephone support is not practical.