Hi All.
I'm having trouble getting good, continuous cuts and wondered if someone could help.
I'd like to use someone's known settings to see if I can at least be in the ballpark.
I'm at a school using the 4'x4' PlasmaCam with updated servo package that came out about 2 years ago. We have the PlasmaCut Design Edge Software, Version 4.44, Model DHC2, Controller Version 3. We have a Hypertherm 1000 hooked up to it.
Could I possibly get someone to send me picks of all of the setting screens for some mild steel cutting of 13 gauge, 1/8", 3/16" and 1/4" along with settings for the Hypertherm 1000 as well?
Or guide me to the proper location to look these up?
I realize this is a lot to ask and I know I'm doing something wrong but I'd really like to get this working well for the students and me. It's been nothing but a frustration for us!
Thanks a lot for any help you can give us!!!
PlasmaCam with Hypertherm 1000
-
- 1/2 Star Member
- Posts: 2
- Joined: Wed Dec 26, 2018 1:24 am
- rdj357
- 4 Star Elite Contributing Member
- Posts: 1163
- Joined: Sun Mar 11, 2012 4:40 pm
- Location: Tahlequah, OK
- Contact:
Re: PlasmaCam with Hypertherm 1000
Hello there!
I actually teach 3-day workshops on Plasmacam Design Edge and the tables. If you have a look on my YouTube channel, there are 2 helpful videos on basics titled Design Edge Learning Series.
If you want to skip that and run right to settings explained, here is that one: https://youtu.be/7rcm0DdDPfo
My contact info is on my website as well if I can be of assistance. (Links in my signature)
- Robert
I actually teach 3-day workshops on Plasmacam Design Edge and the tables. If you have a look on my YouTube channel, there are 2 helpful videos on basics titled Design Edge Learning Series.
If you want to skip that and run right to settings explained, here is that one: https://youtu.be/7rcm0DdDPfo
My contact info is on my website as well if I can be of assistance. (Links in my signature)
- Robert
Robert Johnson
----- PlasmaCam 5x10 Table -----
FourNinety Creations & Learn PC, LLC
Plasmacam Goodies! Snap'NCut Mount, AXXON Cards/Cables, Maintenance Items
Learn Plasmacam Workshops
Learn Plasmacam on Facebook
Learn Plasmacam on YouTube
----- PlasmaCam 5x10 Table -----
FourNinety Creations & Learn PC, LLC
Plasmacam Goodies! Snap'NCut Mount, AXXON Cards/Cables, Maintenance Items
Learn Plasmacam Workshops
Learn Plasmacam on Facebook
Learn Plasmacam on YouTube
-
- 1/2 Star Member
- Posts: 2
- Joined: Wed Dec 26, 2018 1:24 am
Re: PlasmaCam with Hypertherm 1000
Robert,
Thank you very much for the information! I'll get to it ASAP and see what I can make happen on the Plasmacam.
Todd
Thank you very much for the information! I'll get to it ASAP and see what I can make happen on the Plasmacam.
Todd