Cutting Error Help

PlasmaCam Hardware discussion forum
Post Reply
HeritageSignCo
1/2 Star Member
1/2 Star Member
Posts: 5
Joined: Sat Oct 06, 2018 6:16 pm

Cutting Error Help

Post by HeritageSignCo »

I zero out the machine and the tip is still hitting the metal by about a quarter inch maybe a half. I am using 40 amp shielded tips. How can I keep the tip from pushing into the metal despite zeroing out the machine?

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

weldguy
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1929
Joined: Fri Apr 17, 2009 11:48 am

Re: Cutting Error Help

Post by weldguy »

Start by turning the auto height control or THC off and see if you can narrow the problem down to that and go from there.
Post Reply

Return to “PlasmaCam, Samson, & Go Torch Forum”