Cutting Error Help
-
- 1/2 Star Member
- Posts: 5
- Joined: Sat Oct 06, 2018 6:16 pm
Cutting Error Help
I zero out the machine and the tip is still hitting the metal by about a quarter inch maybe a half. I am using 40 amp shielded tips. How can I keep the tip from pushing into the metal despite zeroing out the machine?
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 4 Star Elite Contributing Member
- Posts: 1929
- Joined: Fri Apr 17, 2009 11:48 am
Re: Cutting Error Help
Start by turning the auto height control or THC off and see if you can narrow the problem down to that and go from there.