Repair needed for Plasmacam controller, any ideas ?

PlasmaCam Hardware discussion forum
Post Reply
muddymetal_7
Posts: 1
Joined: Tue Jan 14, 2020 5:50 am

Repair needed for Plasmacam controller, any ideas ?

Post by muddymetal_7 » Tue Jan 14, 2020 6:04 am

Hello there,
Writing this on behalf of my husband, James. He has a 13 year old PlasmaCam DHC2 and the controller is no longer working. We know it's definitely the controller as we had a most amazing guy lend us his PlasmaCam controller to try and our machine fired up no problem.

Had the obligatory conversation with Plasmacam which involves the software upgrade and additional add on's required (torch height etc). We are being held to ransom by them and really do not want to hand over thousands for what could be a simple electronic repair.

Does anybody know of a super electronics person who will take a look at our controller and potentially repair it ?
We are in Dorset, United Kingdom.

Thank you for your time !
Kate

User avatar
WyoGreen
Elite Contributing Member
Elite Contributing Member
Posts: 799
Joined: Tue Mar 04, 2014 8:36 pm
Location: Cheyenne, Wyoming

Re: Repair needed for Plasmacam controller, any ideas ?

Post by WyoGreen » Tue Jan 14, 2020 12:47 pm

Hi Kate,
Here's a link to a tread last year about repairing a Plasmacam controller. Perhaps something in there will be of help to you.

viewtopic.php?f=61&t=28442&p=175128&hil ... ir#p175128

Steve
Precision Plasma gantry
CommandCNC Linux controller w/Feather Touch & PN200 hand controller
HT-45 plasma cutter
Plate Marker
Router
Laser

Post Reply

Return to “PlasmaCam”

Industry Pros use FastCut CNC