Easyscriber engrave attachment for Hypertherm torch's
 

Convert to Cut Path Error

PlasmaCam Hardware discussion forum
Post Reply
HeritageSignCo
Posts: 5
Joined: Sat Oct 06, 2018 6:16 pm

Convert to Cut Path Error

Post by HeritageSignCo » Wed Oct 10, 2018 11:18 am

Hello,

I am looking for help with the attached file. I am unable to get it to convert to cut path and successfully cut out this template. I keep getting an error and am not able to covert to cut path. I am using Plasma Cam version 2.12. Any assistance is greatly appreciated!

Thanks,
Erin

You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members. Click Here


User avatar
rdj357
Elite Contributing Member
Elite Contributing Member
Posts: 548
Joined: Sun Mar 11, 2012 4:40 pm

Re: Convert to Cut Path Error

Post by rdj357 » Wed Oct 10, 2018 6:56 pm

Whew, as files go that one was in pretty bad shape.

You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members. Click Here

Robert Johnson
----- PlasmaCam 5x10 Table -----
FourNinety Creations & Learn PC, LLC

Learn Plasmacam Website
Learn Plasmacam on Facebook
Learn Plasmacam on YouTube

HeritageSignCo
Posts: 5
Joined: Sat Oct 06, 2018 6:16 pm

Re: Convert to Cut Path Error

Post by HeritageSignCo » Wed Oct 10, 2018 8:56 pm

Hey, thank you so much! The original was bought off Etsy. Won’t make that mistake again. I appreciate it!

User avatar
rdj357
Elite Contributing Member
Elite Contributing Member
Posts: 548
Joined: Sun Mar 11, 2012 4:40 pm

Re: Convert to Cut Path Error

Post by rdj357 » Thu Oct 11, 2018 7:15 am

No problem!
Robert Johnson
----- PlasmaCam 5x10 Table -----
FourNinety Creations & Learn PC, LLC

Learn Plasmacam Website
Learn Plasmacam on Facebook
Learn Plasmacam on YouTube

Post Reply