Powermax 1000 G3 Series

Hypertherm Plasma Cutter discussion forum.
Post Reply
esrudasm
1/2 Star Member
1/2 Star Member
Posts: 1
Joined: Sun Jul 18, 2021 10:28 pm

Powermax 1000 G3 Series

Post by esrudasm »

Hi. My name is Salvador Rudas

I have Powermax 1000 g3 Series and i need know if this work with 220VAC 1 phase. the power cord have 4 wires, black, red, white and green but no have the connector.

can you help with diagram for connection.
in my country have 220AC mono phase (Line1, Line2,Neutral and Ground)

The specs machine have this
200 – 600 V, 1/3-PH, 50 - 60 Hz, CSA
230 – 400 V, 3-PH, 50 - 60 Hz, CE

Thanks a Lot.
weldguy
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1929
Joined: Fri Apr 17, 2009 11:48 am

Re: Powermax 1000 G3 Series

Post by weldguy »

Attached is the operator manual for your machine. Power supply hookup can be found on pages 31-33 which will get you set up. Good luck and let us know how it works out.
Powermax 1000 Operator Manual.pdf
(4.29 MiB) Downloaded 59 times
Post Reply

Return to “Hypertherm Plasma Cutters”