45xp machine torch mount

Hypertherm Plasma Cutter discussion forum.
Post Reply
mcmental
2.5 Star Member
2.5 Star Member
Posts: 133
Joined: Thu May 14, 2020 10:06 am

45xp machine torch mount

Post by mcmental »

hi there what is everyone using as a mount for their machine torch please? will be running https://www.candcnc.net/store-home/mp36 ... wlinux-pc/ along with the 45xp.

thanks
User avatar
acourtjester
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 7770
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: 45xp machine torch mount

Post by acourtjester »

Your question is odd as you ask about a machine torch mount and give a website for controller electronics??
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
mcmental
2.5 Star Member
2.5 Star Member
Posts: 133
Joined: Thu May 14, 2020 10:06 am

Re: 45xp machine torch mount

Post by mcmental »

I’m using that setup for the torch height control
User avatar
djreiswig
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1929
Joined: Thu Nov 19, 2015 10:02 pm
Location: SE Nebraska

Re: 45xp machine torch mount

Post by djreiswig »

Better than those that don't post enough information.
No help on the torch mount, mine came with the table.
2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
User avatar
acourtjester
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 7770
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: 45xp machine torch mount

Post by acourtjester »

Here are Images of the type of mounts I have used on the tables I built. First are you planning to use a floating head assembly? If not why? What I show if a plate that mounts on to the Z axis assembly, this plate has 4 "V" bearings and "V" rails to allow the torch to move up and down easily. this setup to trigger the floating head switch (safety). I also use an Ohmic sensor for the actual sensing of the metal surface to set the Z0.0 position. Many torches have the same diameter of 1-3/8" I'm sure other member can supply their design as some also include a magnetic release to help with torch crashes. :Sad
torch mount.JPG
DSCN3924.JPG
DSCN3926.JPG
DSCN3922.JPG
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
User avatar
WyoGreen
4 Star Member
4 Star Member
Posts: 897
Joined: Tue Mar 04, 2014 8:36 pm
Location: Cheyenne, Wyoming

Re: 45xp machine torch mount

Post by WyoGreen »

What are you going to use for the 'Z' axis? Since you referenced the CandCNC site, are you planing on using their 'Super Z', or make your own such as Acourtjester suggests?

Steve
Precision Plasma gantry
CommandCNC Linux controller w/Feather Touch & PN200 hand controller
HT-45 plasma cutter
Plate Marker
Router
Laser
mcmental
2.5 Star Member
2.5 Star Member
Posts: 133
Joined: Thu May 14, 2020 10:06 am

Re: 45xp machine torch mount

Post by mcmental »

I’ve built my table up the x y z axis are all built, but I’m looking at making my own, doesn’t seem to be many here in the uk. Seen a few 3D printed options out there.
User avatar
acourtjester
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 7770
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: 45xp machine torch mount

Post by acourtjester »

If you have a 3-D printer a member here may set you up, both in the UK.
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
User avatar
SeanP
4 Star Member
4 Star Member
Posts: 950
Joined: Thu Aug 01, 2013 11:50 am
Location: Co Kerry, Ireland

Re: 45xp machine torch mount

Post by SeanP »

That's a nice design for the z axis Tom, I couldn't get my head around building one when I made my table and went with the velox route, it's still going although I really should be looking for a new ball screw, hate to think how many times it's been up and down in the last 7yrs, I've swapped out a few linear bearings.

Regards the torch mount I cut my own from 10mm plate, work great, I'm always adjusting height for different jobs.

Have a look here, the mag holder works great, still in use every day, only change I made was to use 3 - 20mm dia magnets with countersunk hole and screw them down rather than tape.

viewtopic.php?f=103&t=24499&p=152510#p149639
Powermax XP45
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
User avatar
acourtjester
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 7770
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: 45xp machine torch mount

Post by acourtjester »

I remember seeing the original post that is a slick simple design. I still have not put one on my torch ( been lucky so far with hangups :Wow ).
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Post Reply

Return to “Hypertherm Plasma Cutters”