Powermax 45xp Torches on Powermax 65
- Ironken
- 3 Star Member
- Posts: 322
- Joined: Thu Nov 30, 2017 7:29 pm
Powermax 45xp Torches on Powermax 65
I currently have a PM45xp with machine torch, 15 degree and 75 degree Duramax torches. I may end up selling the 45xp along with the machine torch. My question is..will the 75/15 degree torches work on a PM65 at full output or at all? I intend on purchasing the 65 with machine torch for better duty cycle at lower amperages and greater cut capacity.
-
- 3.5 Star Member
- Posts: 511
- Joined: Wed Apr 23, 2014 2:48 pm
Re: Powermax 45xp Torches on Powermax 65
Personally I would give it a shot, and just watch the duty-cycle.. Done this with a SL-60 torch instead of SL-100 many times.. (Thermal Dynamics) Maybe use the 45 amp stuff, and 65 amp in a pinch.
-
- 5 Star Elite Contributing Member
- Posts: 3087
- Joined: Mon Jul 20, 2009 11:18 pm
- Location: North Carolina
Re: Powermax 45xp Torches on Powermax 65
The 45 xp torches will work on the Powermax45, 45xp, 65, 85 and 105 plasma systems. Jim Colt Hypertherm
- Ironken
- 3 Star Member
- Posts: 322
- Joined: Thu Nov 30, 2017 7:29 pm
Re: Powermax 45xp Torches on Powermax 65
jimcolt wrote:The 45 xp torches will work on the Powermax45, 45xp, 65, 85 and 105 plasma systems. Jim Colt Hypertherm
Thank you, Jim. Can I use my current torches at full output of the PM65 with the appropriate consumables?
-
- 5 Star Elite Contributing Member
- Posts: 3087
- Joined: Mon Jul 20, 2009 11:18 pm
- Location: North Carolina