Hypertherm powermax 45 xp air filter bowl o ring size

Hypertherm Plasma Cutter discussion forum.
Post Reply
drtjnky
1/2 Star Member
1/2 Star Member
Posts: 2
Joined: Fri Sep 21, 2018 10:54 am

Hypertherm powermax 45 xp air filter bowl o ring size

Post by drtjnky »

I have Hypertherm powermax 45 xp and I am trying to find the o ring size for the air filter bowl on the back of the unit. I believe this is the replacemnt number: 428673 Kit: Air filter bowl (polycarbonate) with metal guard. The kit does not specify if it comes with the o ring. I am trying not to spend $100 since all i need is the o ring. Thanks for the help.
User avatar
SegoMan DeSigns
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 805
Joined: Sat Jan 06, 2018 4:45 pm

Re: Hypertherm powermax 45 xp air filter bowl o ring size

Post by SegoMan DeSigns »

Go to any O-Ring site and down load the size chart, that along with a set of calipers will get you going again..

Here is another thread on some of the other O-Rings used, do a little research and save a lot of money:

https://www.plasmaspider.com/viewtopic. ... gs#p224708
Post Reply

Return to “Hypertherm Plasma Cutters”