Setting up a new Eagle Plasma 5X10. Bought a new PowerMax45 with a CPC port & interface #228350.
Table seems to be working. Following path.
Problem is PM45 not coming on.
Even tried touching the green and black wires and still nothing from cutter.
Not sure where to go from here. Any help greatly appreciated.
PM45 not coming on
-
- 1 Star Member
- Posts: 13
- Joined: Wed Nov 01, 2017 7:34 pm
- Location: Southern Oklahoma
PM45 not coming on
Eagle Plasma 5X10
Hyperthem 45
Hyperthem 45
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7869
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: PM45 not coming on
More info is needed what do you mean not coming on, no power on the unit, not making plasma.
How are we to know what the green and black wires go to.
remember we are not there looking at what you see!
How are we to know what the green and black wires go to.
remember we are not there looking at what you see!
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
-
- 1 Star Member
- Posts: 13
- Joined: Wed Nov 01, 2017 7:34 pm
- Location: Southern Oklahoma
Re: PM45 not coming on
Plasma machine is on with all green lights. When I touch the green and black wires (to trigger the unit) no air comes out of the machine head and no arc
Eagle Plasma 5X10
Hyperthem 45
Hyperthem 45
-
- 1 Star Member
- Posts: 13
- Joined: Wed Nov 01, 2017 7:34 pm
- Location: Southern Oklahoma
Re: PM45 not coming on
According to owners manual green and black are the "start Plasma"
Eagle Plasma 5X10
Hyperthem 45
Hyperthem 45
-
- 3 Star Elite Contributing Member
- Posts: 445
- Joined: Sat Jul 04, 2015 10:43 pm
Re: PM45 not coming on
Do you have a machine torch or a hand torch with it?
Steve
Platform CNC Plasma table
CandCNC Ethercut IV DTHC
Hypertherm 85/CPC/RS485
Miller 350P
Miller Dynasty 280DX
Platform CNC Plasma table
CandCNC Ethercut IV DTHC
Hypertherm 85/CPC/RS485
Miller 350P
Miller Dynasty 280DX
-
- 3 Star Elite Contributing Member
- Posts: 445
- Joined: Sat Jul 04, 2015 10:43 pm
Re: PM45 not coming on
What mode is the front panel in? Did you set the amps?
Steve
Platform CNC Plasma table
CandCNC Ethercut IV DTHC
Hypertherm 85/CPC/RS485
Miller 350P
Miller Dynasty 280DX
Platform CNC Plasma table
CandCNC Ethercut IV DTHC
Hypertherm 85/CPC/RS485
Miller 350P
Miller Dynasty 280DX
-
- 1 Star Member
- Posts: 13
- Joined: Wed Nov 01, 2017 7:34 pm
- Location: Southern Oklahoma
-
- 3 Star Elite Contributing Member
- Posts: 445
- Joined: Sat Jul 04, 2015 10:43 pm
Re: PM45 not coming on
Sound like a call to Hypertherm support is in order.
Steve
Platform CNC Plasma table
CandCNC Ethercut IV DTHC
Hypertherm 85/CPC/RS485
Miller 350P
Miller Dynasty 280DX
Platform CNC Plasma table
CandCNC Ethercut IV DTHC
Hypertherm 85/CPC/RS485
Miller 350P
Miller Dynasty 280DX
-
- 1 Star Member
- Posts: 13
- Joined: Wed Nov 01, 2017 7:34 pm
- Location: Southern Oklahoma