Fathers Day - Dad's Garage Sign

Share, browse, & download dxf, svg, or other vector based designs. If you take be sure to give back.
User avatar
sewester
1 Star Member
1 Star Member
Posts: 12
Joined: Sat Aug 11, 2012 11:43 pm
Location: Washington

Re: PlasmaSpider DXF of the Week - Dad's Garage Sign

Post by sewester »

nice work thank you
Countrylane
2.5 Star Member
2.5 Star Member
Posts: 181
Joined: Wed Jan 20, 2010 6:55 pm
Location: Canada

Re: PlasmaSpider DXF of the Week - Dad's Garage Sign

Post by Countrylane »

Thank you:) Hope to use it sometime.
bobrl
1.5 Star Member
1.5 Star Member
Posts: 48
Joined: Thu Dec 13, 2012 11:49 pm

Re: PlasmaSpider DXF of the Week - Dad's Garage Sign

Post by bobrl »

hello!! I am new to this CNC world, and I tried to nest this file on the program I received with my table, and it shows two signs,side by side, and says there are collisions !! Seems like every time I try to do a file like this , my program makes a big issuse of it!!!Like I said I am new at this!! Probably missing something!!! lol
It is an awsome sign!!! I hope I can figure it out some day!!!! Thanks Jason,fine work!!!
Bob
muzza
4 Star Member
4 Star Member
Posts: 1472
Joined: Wed Feb 04, 2009 5:35 pm

Re: PlasmaSpider DXF of the Week - Dad's Garage Sign

Post by muzza »

You will find that a lot of Jason's signs have two versions, the one on the left is usually the plasma cutting file deigned with open paths to cut at about the size it is, the one on the right provides looped paths to make it more suitable for laser or water jet which has a much smaller kerf or to be plasma cut much larger.
Murray
bobrl
1.5 Star Member
1.5 Star Member
Posts: 48
Joined: Thu Dec 13, 2012 11:49 pm

Re: PlasmaSpider DXF of the Week - Dad's Garage Sign

Post by bobrl »

Thanks Murray!! How do i choose one or the other?? when i try to convert it i dont get a choice,that i know of!!! lol my Nessting program is IBE cnc cut, a German made program!!!
User avatar
Larry83301
5 Star Elite Contributing Member
5 Star Elite Contributing Member
Posts: 2645
Joined: Tue Oct 27, 2009 6:36 pm
Location: Twin Falls, Idaho

Re: PlasmaSpider DXF of the Week - Dad's Garage Sign

Post by Larry83301 »

bobrl wrote:Thanks Murray!! How do i choose one or the other?? when i try to convert it i dont get a choice,that i know of!!! lol my Nessting program is IBE cnc cut, a German made program!!!
Here you go. Didn't know which one you wanted so I attached both of them. :D :D

Larry

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

bobrl
1.5 Star Member
1.5 Star Member
Posts: 48
Joined: Thu Dec 13, 2012 11:49 pm

Re: PlasmaSpider DXF of the Week - Dad's Garage Sign

Post by bobrl »

Thanks Larry !!!
muzza
4 Star Member
4 Star Member
Posts: 1472
Joined: Wed Feb 04, 2009 5:35 pm

Re: PlasmaSpider DXF of the Week - Dad's Garage Sign

Post by muzza »

That's the great part about here, always plenty of help.

I usually bring them into Corel and just delete the one I don't need. I also do a bit of a check to make sure the ends of open paths are far enough away from other lines so as to avoid blow throughs.
Murray
Stridis
1.5 Star Member
1.5 Star Member
Posts: 26
Joined: Fri Apr 06, 2012 1:59 pm

Re: PlasmaSpider DXF of the Week - Dad's Garage Sign

Post by Stridis »

This is how I used your drawing. I hope you don?t mind that I changed it for better suit my interest. The text says ?Magnus playhouse? and ?Repair shop? in Swedish.
Many thanks

/Magnus

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

User avatar
FreeDXF.com
2.5 Star Member
2.5 Star Member
Posts: 145
Joined: Mon Mar 23, 2009 11:49 am

Re: PlasmaSpider DXF of the Week - Dad's Garage Sign

Post by FreeDXF.com »

Very cool modification of the design work. I like to see people use what I provide and customize it to fit their needs the best! Thanks for sharing. Awesome job! JH
Image
User avatar
FreeDXF.com
2.5 Star Member
2.5 Star Member
Posts: 145
Joined: Mon Mar 23, 2009 11:49 am

Re: PlasmaSpider DXF of the Week - Dad's Garage Sign

Post by FreeDXF.com »

Very cool modification of the design work. I like to see people use what I provide and customize it to fit their needs the best! Thanks for sharing. Awesome job! JH
Image
nccstud
1 Star Member
1 Star Member
Posts: 10
Joined: Tue May 08, 2012 3:44 pm

Re: PlasmaSpider DXF of the Week - Dad's Garage Sign

Post by nccstud »

I just gotta work on putting a Mustang in the middle and I plan on donating this to the local chicago based club for their season opener....Thanks a bunch, amazing sign!
muzza
4 Star Member
4 Star Member
Posts: 1472
Joined: Wed Feb 04, 2009 5:35 pm

Re: PlasmaSpider DXF of the Week - Dad's Garage Sign

Post by muzza »

jasonsmetaldesign wrote:Very cool modification of the design work. I like to see people use what I provide and customize it to fit their needs the best! Thanks for sharing. Awesome job! JH
Here's a few from some of your recent files so generously donated here Jason,

Sean has an A tudor but fully fendered and running a late model Holden engine and hood top.
Image

This was a birthday present for the guy who has everything including a custom '58 Biscane ordered by his wife, backlit with mica facing
Image

Open faced and backlit
Image

Another take on the 'one above with a '32 coupe and a more Aussie backdrop, again open faced and backlit
Image

A raffle donation to the Renegades Hot Rod Club, painted silver marblizer over a black base.
Image

thanks again
Murray
User avatar
ctorres3120
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 612
Joined: Thu Dec 16, 2010 9:00 pm

Re: PlasmaSpider DXF of the Week - Dad's Garage Sign

Post by ctorres3120 »

Thanks for sharing :D Jason
CorelDrawX4
MasterCam
SheetCam
Mach3
PlasmaCNC 6x6 Table
Hypertherm PowerMax 1250

http://www.facebook.com/ctorresp?ref=tn_tnmn
seajinx
3 Star Member
3 Star Member
Posts: 311
Joined: Fri Oct 31, 2014 8:50 am
Location: East Tennessee

Re: Fathers Day - Dad's Garage Sign

Post by seajinx »

Nice work Jason, thanks for sharing.
mjvgraphics
2.5 Star Member
2.5 Star Member
Posts: 123
Joined: Wed Jun 01, 2016 5:57 pm

Re: Fathers Day - Dad's Garage Sign

Post by mjvgraphics »

Very cool.

Thanks.
Best Regards,

Mike Volpone
MJV Graphics
CorelDraw X7
SolidWorks 2014

Coming soon: ShopSabre SideKick 8 w/ 6" Pipe Attachment
and HyperTherm 105
User avatar
david jordan
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 671
Joined: Sun Jul 06, 2014 2:21 pm

Re: Fathers Day - Dad's Garage Sign

Post by david jordan »

Thank you, very nice.
PlasmaCam DHC 2 4 X 4 table
Powermax 65
400amp mig welder with dc tig
CRP Bench Top Pro
CS 6,Aspire,Mach 3
Bridgeport
Wells Index mill
10K X 42" Southbend, 6K collets
16" Sothbend, 5C collets
16" Hendy lathe
Everlast Tig200 Amp
PL1220
jlogan73
1.5 Star Member
1.5 Star Member
Posts: 42
Joined: Mon Jul 13, 2015 6:55 pm

Re: Fathers Day - Dad's Garage Sign

Post by jlogan73 »

Thanks Jason!
B Holmes
2 Star Member
2 Star Member
Posts: 85
Joined: Mon Aug 06, 2012 9:29 pm

Re: Fathers Day - Dad's Garage Sign

Post by B Holmes »

Awesome file! Thank you, Jason.
5 x 10 Air bladder water table
Precision plasma HDB gantry
CandCnC 620-4 Bladerunner
Feather touch ohmic plate sensing
Hypertherm Powermax 65
2015 Autocad lt
Sheetcam
Mach 3
Central California
djs
1.5 Star Member
1.5 Star Member
Posts: 47
Joined: Fri May 22, 2009 11:44 am

Re: Fathers Day - Dad's Garage Sign

Post by djs »

thank you for sharing Jason............. DJS in Texas
Maadman
3 Star Member
3 Star Member
Posts: 296
Joined: Wed Apr 01, 2015 10:30 pm
Location: Watkins, Iowa

Re: Fathers Day - Dad's Garage Sign

Post by Maadman »

Fantastic file, thanks for sharing.
thebouncingwelder
2 Star Member
2 Star Member
Posts: 66
Joined: Mon Jul 13, 2015 5:07 pm

Re: Fathers Day - Dad's Garage Sign

Post by thebouncingwelder »

Thank you for the cool design. I cant wait to give it try
User avatar
david jordan
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 671
Joined: Sun Jul 06, 2014 2:21 pm

Re: Fathers Day - Dad's Garage Sign

Post by david jordan »

Looks great, thank you.
PlasmaCam DHC 2 4 X 4 table
Powermax 65
400amp mig welder with dc tig
CRP Bench Top Pro
CS 6,Aspire,Mach 3
Bridgeport
Wells Index mill
10K X 42" Southbend, 6K collets
16" Sothbend, 5C collets
16" Hendy lathe
Everlast Tig200 Amp
PL1220
towman1002
1.5 Star Member
1.5 Star Member
Posts: 48
Joined: Mon Aug 29, 2016 8:43 am

Re: Fathers Day - Dad's Garage Sign

Post by towman1002 »

thats freaken sweet.wow....thank you
geoff7892001
1/2 Star Member
1/2 Star Member
Posts: 8
Joined: Mon Sep 21, 2009 10:37 am

Re: Fathers Day - Dad's Garage Sign

Post by geoff7892001 »

Thanks so much this will look awesome at the shop.
Post Reply

Return to “DXF & SVG Plasma Cutting File Sharing Forum”