I cut an Airtoolsrack from RClippa. When I was bending it I realized that I wanted one where you can hang your hoses on so I took his idea and letters and made this. Front and back are made of 3mm sheet and the inner round piece of 2mm.
If anybody uses this I would appreciate if you put a photo in this thread.
I?m sorry for the crappy mobile phone photos
/Magnus
Air tools rack with hose hanger
-
- 1.5 Star Member
- Posts: 26
- Joined: Fri Apr 06, 2012 1:59 pm
Air tools rack with hose hanger
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 3 Star Member
- Posts: 470
- Joined: Thu Mar 03, 2011 12:06 am
- Location: Maine
Re: Air tools rack with hose hanger
Good idea. Thanks!
- ctorres3120
- 3.5 Star Elite Contributing Member
- Posts: 612
- Joined: Thu Dec 16, 2010 9:00 pm
Re: Air tools rack with hose hanger
excellent, thanks for sharing.
Carlos
Carlos
CorelDrawX4
MasterCam
SheetCam
Mach3
PlasmaCNC 6x6 Table
Hypertherm PowerMax 1250
http://www.facebook.com/ctorresp?ref=tn_tnmn
MasterCam
SheetCam
Mach3
PlasmaCNC 6x6 Table
Hypertherm PowerMax 1250
http://www.facebook.com/ctorresp?ref=tn_tnmn
-
- 1/2 Star Member
- Posts: 4
- Joined: Fri Dec 11, 2020 5:46 pm
-
- 1/2 Star Member
- Posts: 5
- Joined: Fri Feb 04, 2022 8:04 am
Re: Air tools rack with hose hanger
Nice This can work great in my shed,