It is currently Fri Oct 19, 2018 4:10 pm

 

Vise Grips Rack

DXF Art Sharing Forum is for sharing dxf, plt, or any other vector file for plasma cutting. Browse what others have posted or post some DXF art files of your own.
Redlunn
Posts: 7
Joined: Sat Apr 30, 2011 6:04 pm

Vise Grips Rack

Postby Redlunn » Fri Oct 28, 2011 7:31 pm

Yeah, my first post!

Here is a simple rack for holding various vise grips. I don't have any type of brake so I cut reliefs at the bend points. I plan to weld it underneath my welding table.

Redlunn

Image
Image
ViseGripsRack.dxf

You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members. Click Here


mdoffroad
Posts: 94
Joined: Wed Mar 30, 2011 10:10 pm

Re: Vise Grips Rack

Postby mdoffroad » Fri Oct 28, 2011 9:50 pm

15 Downloads and not one thank you.......whats wrong with some of you people!

Thank you for your file!!!

aicomp
Elite Contributing Member
Elite Contributing Member
Posts: 228
Joined: Wed Feb 02, 2011 5:15 pm
Location: Susanville, California
Contact:

Re: Vise Grips Rack

Postby aicomp » Fri Oct 28, 2011 10:20 pm

Very Nice fiole. Thanks,
Mike
http://www.PenningtonFab.com
Torchmate 3 with AVHC
Hypertherm 1250
Lincoln V205T Tig
Lincoln wirematic 250
Eastwood 175 with Spoolgun
Eastwood 135 Mig

User avatar
Chopper John
Elite Contributing Member
Elite Contributing Member
Posts: 397
Joined: Mon Aug 24, 2009 10:22 pm
Location: Des Plaines, IL
Contact:

Re: Vise Grips Rack

Postby Chopper John » Fri Oct 28, 2011 11:38 pm

I will definitely be cutting this one, all my vice grips a scattered around my shop (clamped to tables, electric conduits, carts or whatever I was standing near) and I was just thinking about trying to do something with them....Thanks!
Chopper John
Mad City Cycles, Inc.

"Every piece of paper has two good sides... Unless you use magic marker then you're f*cked."

bigdeal
Posts: 8
Joined: Mon Oct 19, 2009 4:37 pm

Re: Vise Grips Rack

Postby bigdeal » Fri Oct 28, 2011 11:43 pm

That is very cool. I can see doing about 3 or 4 as gifts and for my self. Thanks! This is the best site ever (do to the people)!

reidy01
Posts: 173
Joined: Sun Aug 21, 2011 3:32 am

Re: Vise Grips Rack

Postby reidy01 » Sat Oct 29, 2011 12:01 am

Cool I'll be doing a few of those myself thanks for sharing. ;)

dikko
Posts: 180
Joined: Sat Aug 13, 2011 7:56 am

Re: Vise Grips Rack

Postby dikko » Sat Oct 29, 2011 6:49 am

thankyou i will def use this in my shop thx greg

User avatar
Loyd
Elite Contributing Member
Elite Contributing Member
Posts: 694
Joined: Tue Nov 03, 2009 12:28 am
Location: Bald Knob, AR
Contact:

Re: Vise Grips Rack

Postby Loyd » Sat Oct 29, 2011 9:12 am

1Th 5:18 In every thing give thanks: for this is the will of God in Christ Jesus concerning you.

Thank you for the file. I will be using a couple of those.
Loyd
De inimico non loquaris sed cogites
Do not wish ill upon your enemies, plan it.

User avatar
plasmajoe
Elite Contributing Member
Elite Contributing Member
Posts: 691
Joined: Thu Jul 30, 2009 8:19 pm

Re: Vise Grips Rack

Postby plasmajoe » Sat Oct 29, 2011 10:19 am

Loyd wrote:1Th 5:18 In every thing give thanks: for this is the will of God in Christ Jesus concerning you.

Thank you for the file. I will be using a couple of those.
Loyd

Well said Loyd, and very nice to see you posting again.

The file is great Redlunn, thank you so much for sharing, awesome first post.

Plasma Joe

scottlane
Posts: 96
Joined: Fri Aug 21, 2009 7:23 pm
Location: Texas

Re: Vise Grips Rack

Postby scottlane » Sat Oct 29, 2011 10:40 am

Thanks for the rack. Will come in handy. Keep up the good work. :D

M & N Steel CNC
Elite Contributing Member
Elite Contributing Member
Posts: 251
Joined: Mon Jun 20, 2011 9:12 am
Location: Cache, Oklahoma
Contact:

Re: Vise Grips Rack

Postby M & N Steel CNC » Sat Oct 29, 2011 11:39 am

Very cool, Thanks for sharing.
PlasmaRoute CNC 4 x 4
Corel Draw X5
SheetCam

Baileigh 12 gauge 40 inch box brake

User avatar
SCHIDTHEAD
Elite Contributing Member
Elite Contributing Member
Posts: 279
Joined: Fri Jan 08, 2010 12:28 am
Location: Under a Hood

Re: Vise Grips Rack

Postby SCHIDTHEAD » Sat Oct 29, 2011 4:12 pm

Sweeeet! well done I just found the spot for two of them. Thnx.
"Government, even in its best state, is but a necessary evil; in its worst state, an intolerable one."--Thomas Paine 1776

danadtaylor

Re: Vise Grips Rack

Postby danadtaylor » Sat Oct 29, 2011 11:40 pm

I've got a wrenchs file i'll post later...but thanks for sharing this one....:) everyone needs a nice and orderly shop ......

Terry
Posts: 178
Joined: Mon Aug 01, 2011 6:22 pm

Re: Vise Grips Rack

Postby Terry » Thu Nov 03, 2011 9:12 pm

Looks Great Thanks

prattswelding
Posts: 87
Joined: Wed Jun 15, 2011 2:07 pm

Re: Vise Grips Rack

Postby prattswelding » Wed Nov 16, 2011 9:37 pm

Thanks, this is one of the most practical files I've downloaded in a while. I couldn't really find a good spot under my table that wouldn't be in my way, so I had to improvise. I took 4 of the cut patterns and made sort of a Vise-Grip Chandelier. It freed up a drawer in my Snap-On box, and looks pretty cool hanging over the welding table. Great design.

Image

Image

Image

User avatar
larrycameron44
Elite Contributing Member
Elite Contributing Member
Posts: 562
Joined: Sun Oct 31, 2010 4:12 pm
Location: Auckland New Zealand

Re: Vise Grips Rack

Postby larrycameron44 » Thu Nov 17, 2011 3:36 am

Bloody hell, you got more Vice grips than I have had hot breakfasts :mrgreen:

Larry
NZ

agteacher
Posts: 75
Joined: Mon Oct 25, 2010 2:57 pm
Location: Atascocita Texas

Re: Vise Grips Rack

Postby agteacher » Thu Nov 17, 2011 1:49 pm

Just cut two of them out for the shop here at school. The kids loved the idea and it keeps them all together and not just laying around.

thanks for the file.

I am currently working on making one for hammers!

I have been inspired!!
Randy Dobbins
Welding Teacher Humble ISD

Redlunn
Posts: 7
Joined: Sat Apr 30, 2011 6:04 pm

Re: Vise Grips Rack

Postby Redlunn » Fri Nov 18, 2011 4:24 pm

Thanks for the comments everyone. I am a fan of the chandelier (I might even be a little jealous).

Redlunn

just_wanna_drive
Posts: 19
Joined: Sun Nov 06, 2011 10:25 pm

Re: Vise Grips Rack

Postby just_wanna_drive » Fri Dec 02, 2011 12:53 am

That is cool! I wish I would have joined this site two weeks ago, I just finished my welding table. :|

I may have to weld this to the 1"bar that I'm using now... Thanks!

RClippa
Posts: 21
Joined: Fri Jul 02, 2010 11:01 am

Re: Vise Grips Rack

Postby RClippa » Mon Dec 05, 2011 12:30 pm

Thank you for taking the time to share. Will be nice up under the welding table.

smoker_tom
Posts: 5
Joined: Wed Dec 07, 2011 11:02 pm

Re: Vise Grips Rack

Postby smoker_tom » Thu Dec 08, 2011 9:49 pm

Fantastic idea, nice work Redlunn.

The Chandelier is a great idea as well. I will have to keep this idea on the back burner for a while but I think I need one thats one flat piece that gets rolled and welded.

Like a giant lazy susan hanging from one chain. It sounds cool but it may not work out well if one side gets loaded up and unbalanced.

Thanks for the share.

[email protected]
Posts: 12
Joined: Fri Dec 16, 2011 8:02 pm

Re: Vise Grips Rack

Postby [email protected] » Sat Dec 17, 2011 7:15 pm

thanks this will work nicely on the new welding table

61 Sunliner
Posts: 39
Joined: Thu Dec 01, 2011 3:03 pm

Re: Vise Grips Rack

Postby 61 Sunliner » Sat Dec 31, 2011 9:50 pm

Thanks for the file, it works great. Made a couple for myself and a few for Christmas presents.
Mike

youngr
Posts: 5
Joined: Sat Oct 19, 2013 10:32 pm

Re: Vise Grips Rack

Postby youngr » Sun May 11, 2014 3:53 pm

Very handy rack. Thanks for sharing it. Richard

User avatar
CNCCAJUN
Elite Contributing Member
Elite Contributing Member
Posts: 1116
Joined: Mon Dec 26, 2011 11:38 pm
Location: Baton Rouge, LA

Re: Vise Grips Rack

Postby CNCCAJUN » Sun May 11, 2014 6:04 pm

Nice file, but I just realized the "G" in GRIPS is not all there . . .

Thanks,
Steve
Smiling Gator Metal Works, LLC
Dynatorch 4X4 XLS
PowerMAX 85
Baton Rouge, Louisiana


Return to “DXF Art - DXF Clip Art File Sharing Forum”

Who is online

Users browsing this forum: Vanquish and 20 guests

Easyscriber engrave attachment for Hypertherm torch's