Grinder disc storage DXF file to share

Share, browse, & download dxf, svg, or other vector based designs. If you take be sure to give back.
Post Reply
hwc89
1/2 Star Elite Contributing Member
1/2 Star Elite Contributing Member
Posts: 4
Joined: Sat Jul 06, 2019 10:03 am

Grinder disc storage DXF file to share

Post by hwc89 »

Here's a grinding disk holder i drew up.

Image

grinding disc holder v1.dxf

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 8599
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: grinder disc file to share

Post by adbuch »

Thanks for sharing your holder design. What diameter grinding discs is this one intended to hold. As drawn, it shows about 15 1/2" between centers on the tabs. I would guess 7" grinding discs for a large angle grinder.

David
grinder disc holder.jpg

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

DieselFumes
3.5 Star Member
3.5 Star Member
Posts: 528
Joined: Thu Dec 05, 2019 11:33 am

Re: Grinder disc storage DXF file to share

Post by DieselFumes »

Thanks for the file, would be a great one for the shop organization thread here :Like :Like
hwc89
1/2 Star Elite Contributing Member
1/2 Star Elite Contributing Member
Posts: 4
Joined: Sat Jul 06, 2019 10:03 am

Re: Grinder disc storage DXF file to share

Post by hwc89 »

sorry for this very late reply, its desinged for 4.5-6 '' 7'' may fit?
hwc89
1/2 Star Elite Contributing Member
1/2 Star Elite Contributing Member
Posts: 4
Joined: Sat Jul 06, 2019 10:03 am

Re: Grinder disc storage DXF file to share

Post by hwc89 »

also it should ony be 6'' center ?
adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 8599
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: Grinder disc storage DXF file to share

Post by adbuch »

hwc89 wrote: Sun Jan 29, 2023 6:47 pm also it should ony be 6'' center ?
The center to center distance should be sufficient to allow a little bit of clearance to take the discs on and off.
David
Post Reply

Return to “DXF & SVG Plasma Cutting File Sharing Forum”