Has only attempt to make a clone of the Cajun Fryer? I was looking to get some ideas or measurements.
Cajun Fryer DIY Plasma DXF Design
-
- 1/2 Star Member
- Posts: 4
- Joined: Sun Sep 01, 2019 7:54 am
- otisa2007
- 3 Star Elite Contributing Member
- Posts: 458
- Joined: Thu Apr 04, 2013 6:59 pm
- Location: mt pleasant texas
- Contact:
Re: Fryer
Heres one i built several years ago I haven't used it in a while so it's dirty but it works good baskets gauge and gas regulator came off amazon mabey this will give you a start
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
- tinspark
- 3.5 Star Elite Contributing Member
- Posts: 655
- Joined: Wed May 30, 2018 4:28 pm
Re: Fryer
The Mrs. wants one too.
kicking around just making a round stainless basket from expanded metal for the old turkey fryer , especially since would only use it in our back yard kitchen to make battered vegetables and maybe fries (oriental style). I might also make a new lid for the turkey fryer so that I could close it up with a slot for the handle to hang out. That way I would only need to store a small lid opposed to a whole fryer unit. Aluminum or stainless would be my material of choice for this modification
kicking around just making a round stainless basket from expanded metal for the old turkey fryer , especially since would only use it in our back yard kitchen to make battered vegetables and maybe fries (oriental style). I might also make a new lid for the turkey fryer so that I could close it up with a slot for the handle to hang out. That way I would only need to store a small lid opposed to a whole fryer unit. Aluminum or stainless would be my material of choice for this modification
Doug,
4x4 GoTorch- expanded
Height Control/Advanced DesignEdge
Hypertherm 45XP-
Logan Lathe + myriads of other shop toys
**CAUTION**- "Does Not Play Well With Others"
4x4 GoTorch- expanded
Height Control/Advanced DesignEdge
Hypertherm 45XP-
Logan Lathe + myriads of other shop toys
**CAUTION**- "Does Not Play Well With Others"
-
- 3.5 Star Member
- Posts: 535
- Joined: Thu Dec 05, 2019 11:33 am
Re: Fryer
Thats awesome, thanks otisa2007
-
- 1/2 Star Member
- Posts: 4
- Joined: Sun Sep 01, 2019 7:54 am
Re: Cajun Fryer DIY Plasma DXF Design
Thanks!!!!!!!!! otisa2077