hydrant wrench

Share, browse, & download dxf, svg, or other vector based designs. If you take be sure to give back.
Post Reply
hardworker
1.5 Star Elite Contributing Member
1.5 Star Elite Contributing Member
Posts: 53
Joined: Thu Aug 06, 2020 3:17 pm
Location: Wisconsin/ Minnesota

hydrant wrench

Post by hardworker »

Here is a water hydrant wrench i made. I cut it out of 1/2. i know most people dont need one, but for the few that do they are nice to have. happy Friday everyone

Image
Hydrant Wrench REV.dxf

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

Rex
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 316
Joined: Sat Oct 08, 2016 12:26 pm

Re: hydrant wrench

Post by Rex »

Thanks for sharing
plasmacam 4x8 with DHC2 with Design Edge
Hypertherm 65
adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 8602
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: hydrant wrench

Post by adbuch »

Hardworker - thanks for sharing this! It could also be modified to fit different sizes of shafts - square, hex, etc.
David
hydrant wrench.jpg

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

DieselFumes
3.5 Star Member
3.5 Star Member
Posts: 528
Joined: Thu Dec 05, 2019 11:33 am

Re: hydrant wrench

Post by DieselFumes »

Another simple useful design to have in the library, thanks for sharing it.
NPHS-FFA
1/2 Star Elite Contributing Member
1/2 Star Elite Contributing Member
Posts: 33
Joined: Sun Nov 13, 2022 12:03 pm

Re: hydrant wrench

Post by NPHS-FFA »

I cut some of these out of 3/16 for spares on our fire trucks and they work great.
North Pemiscot FFA
Wardell, MO

Langmuir Crossfire Pro
Hypertherm 45xp
Machine Torch
hardworker
1.5 Star Elite Contributing Member
1.5 Star Elite Contributing Member
Posts: 53
Joined: Thu Aug 06, 2020 3:17 pm
Location: Wisconsin/ Minnesota

Re: hydrant wrench

Post by hardworker »

awesome! Glad to hear you were able to put it to use.
Post Reply

Return to “DXF & SVG Plasma Cutting File Sharing Forum”