Don't Tread on Me Tattered Flag
-
- 1/2 Star Member
- Posts: 1
- Joined: Mon Jun 18, 2018 1:58 pm
Don't Tread on Me Tattered Flag
Looking for a tattered american flag with the dont tread on me with coiled snake on it any help would be great !!
-
- 4.5 Star Elite Contributing Member
- Posts: 1816
- Joined: Mon Jun 12, 2017 6:43 pm
Re: Help !!
are you looking for help, or just someone to do it for you?
- jmersereau
- 2.5 Star Elite Contributing Member
- Posts: 214
- Joined: Mon Feb 22, 2021 10:04 pm
- Location: Ferrara, Italy
Re: Help !!
This file was removed at the request of the original artist. I did not realize the graphic was copied.robertspark wrote: ↑Mon Apr 26, 2021 1:42 pm are you looking for help, or just someone to do it for you?
Thanks,
Jim
Last edited by jmersereau on Tue May 18, 2021 7:06 am, edited 2 times in total.
PrimeWeld CUT60
Langmuir CrossFire Pro
LightBurn, SheetCAM, FireControl
YESWELDER Digital MIG-205DS MIG
Langmuir CrossFire Pro
LightBurn, SheetCAM, FireControl
YESWELDER Digital MIG-205DS MIG
- ROKCRLER
- 3 Star Elite Contributing Member
- Posts: 595
- Joined: Sun Sep 30, 2018 5:19 pm
- otisa2007
- 3 Star Elite Contributing Member
- Posts: 458
- Joined: Thu Apr 04, 2013 6:59 pm
- Location: mt pleasant texas
- Contact:
Re: Help !!
look on etsy baddogmetalworks has one for 6.99 https://www.etsy.com/listing/816718606/ ... h_click=1i buy alot of files off etsy and modify them for my use
-
- 1.5 Star Member
- Posts: 32
- Joined: Wed Oct 16, 2019 12:39 pm
Re: Help !!
I removed this file at the request of the creator of the snake. Sorry for this. If you would like to buy a great Gadsden Flag DXF the link is below from the original creator. Some great files there!
https://www.etsy.com/listing/739100319/ ... ch_click=1
https://www.etsy.com/listing/739100319/ ... ch_click=1
Last edited by chriscrump01 on Tue May 18, 2021 11:40 am, edited 2 times in total.
- jmersereau
- 2.5 Star Elite Contributing Member
- Posts: 214
- Joined: Mon Feb 22, 2021 10:04 pm
- Location: Ferrara, Italy
Re: Help !!
This file was removed at the request of the original artist. I did not realize the graphic was copied.
Thanks,
Jim
Thanks,
Jim
Last edited by jmersereau on Tue May 18, 2021 7:06 am, edited 1 time in total.
PrimeWeld CUT60
Langmuir CrossFire Pro
LightBurn, SheetCAM, FireControl
YESWELDER Digital MIG-205DS MIG
Langmuir CrossFire Pro
LightBurn, SheetCAM, FireControl
YESWELDER Digital MIG-205DS MIG
- tnbndr
- 4.5 Star Elite Contributing Member
- Posts: 1670
- Joined: Mon Jan 09, 2012 4:30 pm
- Location: New Berlin, WI
- Contact:
Re: Help !!
I've had files created for me by several people on this forum. Typical cost is from $30-$100.Robert, do you have any idea what a fair value would be to generate something like this?
I always send the pic for a price quote prior to giving the okay to proceed. I only do it when I am so backlogged that I don't have time to sit down and trace files.
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com