kindelng spltter
-
- 1.5 Star Elite Contributing Member
- Posts: 28
- Joined: Wed May 15, 2019 1:36 pm
- Location: Yukon Oklahoma
kindelng spltter
I knew it wouldn't be too hard to draw up but I figured id ask to see if any one has made something like this first
- Scratch
- 3.5 Star Elite Contributing Member
- Posts: 806
- Joined: Tue Sep 01, 2009 9:07 pm
- Location: Hudson,WI
- Contact:
Re: kindelng spltter
Got a video on this? I'm interested in seeing how good it works.
I think I'm the oldest 10 year old boy on the forum...
-
- 1.5 Star Elite Contributing Member
- Posts: 28
- Joined: Wed May 15, 2019 1:36 pm
- Location: Yukon Oklahoma
Re: kindelng spltter
This is just a picture i pulled of the internet I'll search YouTube to see I'm sure there is
- SeanP
- 4 Star Member
- Posts: 950
- Joined: Thu Aug 01, 2013 11:50 am
- Location: Co Kerry, Ireland
Re: kindelng spltter
Just so happens I have just the ticket for you!
All parts cut from 6mm
I heated up some plastic water pipe to go on the handle.
Ideal for kindling as long as it's not to knotty.
All parts cut from 6mm
I heated up some plastic water pipe to go on the handle.
Ideal for kindling as long as it's not to knotty.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Last edited by SeanP on Fri May 08, 2020 4:01 pm, edited 2 times in total.
Powermax XP45
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
-
- 1.5 Star Elite Contributing Member
- Posts: 28
- Joined: Wed May 15, 2019 1:36 pm
- Location: Yukon Oklahoma
Re: kindelng spltter
Dude you are awesome!!! Thank You
-
- 3 Star Elite Contributing Member
- Posts: 316
- Joined: Sat Oct 08, 2016 12:26 pm
Re: kindelng spltter
Thanks i will cut one today for the wife
plasmacam 4x8 with DHC2 with Design Edge
Hypertherm 65
Hypertherm 65
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7792
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: kindelng spltter
Sean to go along with this you should post your chain saw log cutter
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
- SeanP
- 4 Star Member
- Posts: 950
- Joined: Thu Aug 01, 2013 11:50 am
- Location: Co Kerry, Ireland
Re: kindelng spltter
All the dxf files should be there now
Powermax XP45
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
- SeanP
- 4 Star Member
- Posts: 950
- Joined: Thu Aug 01, 2013 11:50 am
- Location: Co Kerry, Ireland
Re: kindelng spltter
Ahh go on thenacourtjester wrote: ↑Fri May 08, 2020 2:27 pm Sean to go along with this you should post your chain saw log cutter
Old bandsaw blade for the springy bar.
https://youtu.be/zLMSbXQjvQ4
Powermax XP45
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
-
- 3 Star Elite Contributing Member
- Posts: 316
- Joined: Sat Oct 08, 2016 12:26 pm
Re: kindelng spltter
Seanp do you have some measurement on that
It sure wounld help
Thanks
REX
It sure wounld help
Thanks
REX
plasmacam 4x8 with DHC2 with Design Edge
Hypertherm 65
Hypertherm 65
- SeanP
- 4 Star Member
- Posts: 950
- Joined: Thu Aug 01, 2013 11:50 am
- Location: Co Kerry, Ireland
Re: kindelng spltter
Is that the chainsaw holder?
Trouble is all saws are different, you will need to make to suit your own saw.
Powermax XP45
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
-
- 3 Star Elite Contributing Member
- Posts: 316
- Joined: Sat Oct 08, 2016 12:26 pm
Re: kindelng spltter
Sorry I did say it was the kindling splitter I need to know what measurements
REX
REX
plasmacam 4x8 with DHC2 with Design Edge
Hypertherm 65
Hypertherm 65
-
- 2 Star Member
- Posts: 76
- Joined: Fri Jul 01, 2011 10:47 pm
- Location: Tulliby Lake Alberta Canada
Re: kindelng spltter
Thanks, good project for a Saturday
- SeanP
- 4 Star Member
- Posts: 950
- Joined: Thu Aug 01, 2013 11:50 am
- Location: Co Kerry, Ireland
Re: kindelng spltter
The dxf files are metric, just cut and weld to picture.
Powermax XP45
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
-
- 2.5 Star Elite Contributing Member
- Posts: 175
- Joined: Thu Jun 27, 2013 6:37 am
Re: kindelng spltter
Great share Thankyou
-
- 1.5 Star Elite Contributing Member
- Posts: 28
- Joined: Wed May 15, 2019 1:36 pm
- Location: Yukon Oklahoma
Re: kindelng spltter
For some reason when I open them up all of the parts show up like 400" long. do you have measurements so I ca convert them from metric
-
- 1.5 Star Member
- Posts: 26
- Joined: Sun Apr 14, 2013 12:19 pm
Re: kindelng spltter
I just changed scale when I imported dxf to 3.94% and now its in inches
-
- 1.5 Star Elite Contributing Member
- Posts: 28
- Joined: Wed May 15, 2019 1:36 pm
- Location: Yukon Oklahoma
Re: kindelng spltter
cool Ill give that a try thanks
- ETCWeld
- 3 Star Member
- Posts: 257
- Joined: Sat Dec 16, 2017 10:45 pm
-
- 1 Star Member
- Posts: 17
- Joined: Tue Oct 22, 2019 11:47 am
Re: kindelng spltter
Neat and extremely different approach!
Joe Peterson
4'x8' TM 2 Water Table
TD A80
Flashcut CAD/CAM/CNC
Eastwood QST 30/60 Scroll Comp
ESAB Rebel 215ic
4'x8' TM 2 Water Table
TD A80
Flashcut CAD/CAM/CNC
Eastwood QST 30/60 Scroll Comp
ESAB Rebel 215ic
-
- 6 Star Elite Contributing Member
- Posts: 8645
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
-
- 1/2 Star Member
- Posts: 8
- Joined: Mon Aug 16, 2021 9:09 am
Re: kindelng spltter
since I'm pretty new on plasma cutting, I got some troubles to nest it wihout losing all the right measurements
do somebody has the file nested or can help me out nesting it would be much appreciated
do somebody has the file nested or can help me out nesting it would be much appreciated
-
- 5 Star Elite Contributing Member
- Posts: 2607
- Joined: Thu Jul 24, 2008 11:15 am
Re: kindelng spltter
I opened these in Corel and using the Automatic scale selection and they measurements were all wrong also. Ended up opening them using the metric mm scale selection and everything looks good. Attached is a nested file, hope it helps.3axesdesign wrote: ↑Tue Sep 21, 2021 9:16 am since I'm pretty new on plasma cutting, I got some troubles to nest it wihout losing all the right measurements
do somebody has the file nested or can help me out nesting it would be much appreciated
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
- tinspark
- 3.5 Star Elite Contributing Member
- Posts: 655
- Joined: Wed May 30, 2018 4:28 pm
Re: kindelng spltter
I added about 10" to the handle on the one that I burned a while back. Used 1/4" plate and doubled up the 1,4" at the handle. I am glad I didn't purchase one of these things. It is ok on dry 2x4's and softer wood, but I don't use that stuff too often. Though it does work, for me it is much faster and less frustrating to use a small hatchet for my kindling . That's probably what I am used to using I guess..
I have mine mounted out back near my wood pile and it is basically a conversation piece..
I have mine mounted out back near my wood pile and it is basically a conversation piece..
Doug,
4x4 GoTorch- expanded
Height Control/Advanced DesignEdge
Hypertherm 45XP-
Logan Lathe + myriads of other shop toys
**CAUTION**- "Does Not Play Well With Others"
4x4 GoTorch- expanded
Height Control/Advanced DesignEdge
Hypertherm 45XP-
Logan Lathe + myriads of other shop toys
**CAUTION**- "Does Not Play Well With Others"
-
- 1/2 Star Member
- Posts: 8
- Joined: Mon Aug 16, 2021 9:09 am
Re: kindelng spltter
thanks so much pal !! I produced one out of 1/8 plate left over and its going trough wood pallet wood. i gonna get some 1/4 to see if it can break appart some of soft wood logplasmanewbie wrote: ↑Tue Sep 21, 2021 9:58 amI opened these in Corel and using the Automatic scale selection and they measurements were all wrong also. Ended up opening them using the metric mm scale selection and everything looks good. Attached is a nested file, hope it helps.3axesdesign wrote: ↑Tue Sep 21, 2021 9:16 am since I'm pretty new on plasma cutting, I got some troubles to nest it wihout losing all the right measurements
do somebody has the file nested or can help me out nesting it would be much appreciated
KindlingSplitter.dxf