Re: files

Share, browse, & download dxf, svg, or other vector based designs. If you take be sure to give back.
Post Reply
plain ol Bill
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 689
Joined: Fri Aug 15, 2008 6:22 pm
Location: Tenino,WA

Re: files

Post by plain ol Bill »

I really like this file and have wanted to cut it but Sheetcam showed up a lot of irregularities in it. So -- I redrew it in Corel, and made some minor changed to the file at the same time. Here is my rendition of it folks - and Sheetcam likes it now and doesn't show any irregularities anymore.
Image

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

plain ol Bill
Hypertherm 1250
Duramax machine torch
Corel Draw X6
Sheetcam
Mach3
5 x 10 self built table
Lots of ineptitude
richardlw
1.5 Star Member
1.5 Star Member
Posts: 33
Joined: Thu Dec 17, 2009 10:18 pm
Location: alberta canada

Re: files

Post by richardlw »

thanks bill lazy cam now llikes it to
SignTorch Vector Art
4 Star Member
4 Star Member
Posts: 883
Joined: Fri Dec 03, 2010 7:57 pm
Location: SE TX

Re: files

Post by SignTorch Vector Art »

I to revised the artwork for this http://www.plasmaspider.com/viewtopic.php?f=6&t=2872 (original version)

and here is the same with a different deer (newer version), not to scale, artwork only, rack parts not included
Post Reply

Return to “DXF & SVG Plasma Cutting File Sharing Forum”