Time to share a few of my drawings
-
- 1 Star Elite Contributing Member
- Posts: 23
- Joined: Fri Oct 05, 2018 6:14 pm
Time to share a few of my drawings
hi all, iv seen lots of cool drawings here on PS and would like to share a few of mine!
I am just a tow truck driver/ recovery expert, certified TIG welder/ fabricator. I draw DXF files for a local metal supply company part time...
I am just a tow truck driver/ recovery expert, certified TIG welder/ fabricator. I draw DXF files for a local metal supply company part time...
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 5 Star Elite Contributing Member
- Posts: 2606
- Joined: Thu Jul 24, 2008 11:15 am
Re: time to share a few of my drawings
Great designs! Thanks for sharing I have buddy who will love Hellcat key holder!!
-
- 1 Star Elite Contributing Member
- Posts: 23
- Joined: Fri Oct 05, 2018 6:14 pm
Re: time to share a few of my drawings
plasmanewbie wrote: ↑Thu Apr 25, 2019 9:19 pm Great designs! Thanks for sharing I have buddy who will love Hellcat key holder!!
here is what I did for my boss.....
here is a few others, the flat plates hold the doors open to look in at shows..... and there is also a hood prop...
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 3 Star Elite Contributing Member
- Posts: 316
- Joined: Sat Oct 08, 2016 12:26 pm
Re: time to share a few of my drawings
Thanks for sharing
plasmacam 4x8 with DHC2 with Design Edge
Hypertherm 65
Hypertherm 65
- david jordan
- 3.5 Star Elite Contributing Member
- Posts: 671
- Joined: Sun Jul 06, 2014 2:21 pm
Re: time to share a few of my drawings
Thank you.
PlasmaCam DHC 2 4 X 4 table
Powermax 65
400amp mig welder with dc tig
CRP Bench Top Pro
CS 6,Aspire,Mach 3
Bridgeport
Wells Index mill
10K X 42" Southbend, 6K collets
16" Sothbend, 5C collets
16" Hendy lathe
Everlast Tig200 Amp
PL1220
Powermax 65
400amp mig welder with dc tig
CRP Bench Top Pro
CS 6,Aspire,Mach 3
Bridgeport
Wells Index mill
10K X 42" Southbend, 6K collets
16" Sothbend, 5C collets
16" Hendy lathe
Everlast Tig200 Amp
PL1220
-
- 2.5 Star Member
- Posts: 178
- Joined: Mon Aug 01, 2011 6:22 pm
-
- 1 Star Member
- Posts: 11
- Joined: Sun Apr 17, 2016 9:12 pm
Re: time to share a few of my drawings
Those are some nice shares!
Thank you! Great job...
Thank you! Great job...
-
- 2.5 Star Elite Contributing Member
- Posts: 215
- Joined: Thu Jul 18, 2013 3:05 pm
Re: time to share a few of my drawings
Very nice shares
I have a friend that asked me about making a SRT hood prop, now I know what he was talking about. Do you have any dimensions on the hood prop and I guess you just welded a pin in the door props.
I have a friend that asked me about making a SRT hood prop, now I know what he was talking about. Do you have any dimensions on the hood prop and I guess you just welded a pin in the door props.
-
- 1 Star Elite Contributing Member
- Posts: 23
- Joined: Fri Oct 05, 2018 6:14 pm
Re: time to share a few of my drawings
The hood prop was 20.000 hook to pin, the door prop’s I actually used the door jam loop latch off of a junk jeep Cherokee worked great!
-
- 2.5 Star Elite Contributing Member
- Posts: 215
- Joined: Thu Jul 18, 2013 3:05 pm
Re: time to share a few of my drawings
That's a good idea.Thanks for the reply.
-
- 1 Star Elite Contributing Member
- Posts: 23
- Joined: Fri Oct 05, 2018 6:14 pm
Re: time to share a few of my drawings
You’re very welcome glad I could help.
- Bor21
- 2 Star Member
- Posts: 75
- Joined: Tue May 30, 2017 7:17 am
- Location: Randolph, NY
Re: time to share a few of my drawings
PERDMIER ! Very nice share
Powermax 85
Bladerunner CandCnC
SheetCam, Mach3,
Inkscape, Gimp
Lots of home BREW
Bladerunner CandCnC
SheetCam, Mach3,
Inkscape, Gimp
Lots of home BREW
-
- 2.5 Star Member
- Posts: 122
- Joined: Fri Oct 21, 2016 10:41 pm
Re: time to share a few of my drawings
Sweet work, man! Very nice. Thank you!
-
- 2 Star Elite Contributing Member
- Posts: 67
- Joined: Fri Oct 06, 2017 2:18 am
- Location: N. Lincs, UK
- Contact:
Re: time to share a few of my drawings
Great drawings
-
- 1.5 Star Member
- Posts: 46
- Joined: Tue Apr 28, 2015 8:32 am
Re: time to share a few of my drawings
Cool ! Thanks for sharing your work!
-
- 3 Star Elite Contributing Member
- Posts: 370
- Joined: Sun Jul 13, 2014 12:49 pm
-
- 1 Star Member
- Posts: 10
- Joined: Sun Aug 26, 2018 12:06 am
Re: Time to share a few of my drawings
Thanks, I love the door props. Will need to make something for my dads 32 at car shows
-
- 2.5 Star Elite Contributing Member
- Posts: 175
- Joined: Thu Jun 27, 2013 6:37 am
Re: Time to share a few of my drawings
Great job cheers for the share
-
- 2.5 Star Elite Contributing Member
- Posts: 132
- Joined: Sun Dec 08, 2013 3:53 pm
Re: Time to share a few of my drawings
very awesome work
-
- 1.5 Star Member
- Posts: 31
- Joined: Tue Aug 20, 2019 2:02 am
Re: Time to share a few of my drawings
Wow! kool thanks for sharing.
-
- 1.5 Star Member
- Posts: 26
- Joined: Tue May 19, 2020 8:24 am
Re: Time to share a few of my drawings
liked the scooter, and many thanks
-
- 1 Star Member
- Posts: 12
- Joined: Wed Jul 07, 2021 4:58 pm
Re: Time to share a few of my drawings
VERY nice, thanks for sharing
- kchoghead
- 2.5 Star Member
- Posts: 135
- Joined: Thu Nov 12, 2015 8:17 am
Re: Time to share a few of my drawings
Thank you very much...nice
-
- 2.5 Star Member
- Posts: 176
- Joined: Sun Nov 26, 2017 8:03 pm
Re: Time to share a few of my drawings
Very Nice, Thanks for taking the time to share!
-
- 2.5 Star Member
- Posts: 102
- Joined: Thu Apr 16, 2015 9:04 am
Re: Time to share a few of my drawings
Thanks for the files! Very nicely done.