Here is a DXF of an airtool holder I made. The slots on the bottom are sized to fit the male nipple on an air tool, the top slots will fit air chisel tools.
Bends are to be made at the little notches on the sides. It is 19" wide, which will fit in a small press brake in a Harbor Freight 20-ton press. I made mine with 1/8" aluminum.
Enjoy,
Bill
Air tool holder DXF
-
- 1 Star Member
- Posts: 24
- Joined: Tue Apr 03, 2018 9:07 am
Air tool holder DXF
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 4 Star Elite Contributing Member
- Posts: 1929
- Joined: Fri Apr 17, 2009 11:48 am
Re: Air tool holder DXF
Nicely done air tool holder! Thanks for sharing!!
-
- 2.5 Star Elite Contributing Member
- Posts: 132
- Joined: Sun Dec 08, 2013 3:53 pm
Re: Air tool holder DXF
Very nice !! I can definetly use one right now
-
- 2.5 Star Member
- Posts: 186
- Joined: Tue Apr 17, 2018 2:36 pm
Re: Air tool holder DXF
Looks Great!