Contribution - Trailer Tie Downs

Share, browse, & download dxf, svg, or other vector based designs. If you take be sure to give back.
Post Reply
DezertBlingMoto
2.5 Star Elite Contributing Member
2.5 Star Elite Contributing Member
Posts: 132
Joined: Sun Dec 08, 2013 3:53 pm

Contribution - Trailer Tie Downs

Post by DezertBlingMoto »

I just drew these up for my trailer to haul my Can-Am ., The middle slot is a weld strip or can also be bolt on with a minor adjustment . Feel free to alter . These are just for the low rate straps that are for UTV'S / Quads . I cut them out of 1/4" for extra measure when ratcheting down .

Image
trailer tie down clips.dxf

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

User avatar
SegoMan DeSigns
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 822
Joined: Sat Jan 06, 2018 4:45 pm

Re: contribution

Post by SegoMan DeSigns »

Thanks for the share!
Searchman
3 Star Member
3 Star Member
Posts: 418
Joined: Tue Aug 18, 2015 11:30 am

Re: Contribution - Trailer Tie Downs

Post by Searchman »

Thanks for the share
ggeh
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 319
Joined: Thu Mar 31, 2016 2:51 pm

Re: Contribution - Trailer Tie Downs

Post by ggeh »

Thanks for the file. Have any pictures of how they look installed?
DezertBlingMoto
2.5 Star Elite Contributing Member
2.5 Star Elite Contributing Member
Posts: 132
Joined: Sun Dec 08, 2013 3:53 pm

Re: Contribution - Trailer Tie Downs

Post by DezertBlingMoto »

no I don't , I haven't even had time to cut them lol . You can put a break as much needed depending where you want it mounted . Im gonna mount them on the outside edge of the frame.
Post Reply

Return to “DXF & SVG Plasma Cutting File Sharing Forum”