One of my first shares.
Hope they are good files, (no cleaning up)
This is a design I made a few years ago. It takes 4 pairs of wellies.
There are a lot of boot rack designs out there, but this one also has a scraper on the end plates.
Just cut the base plate and 2 end plates out of 6mm (1/4") steel and tack together with a welder.
They have tabs and slots so they fit together easy without any jigs.
Use 16mm round bar for the uprights, with a 25mm or so solid ball on the top.
Welly boot rack with integral scraper
-
- 2 Star Elite Contributing Member
- Posts: 67
- Joined: Fri Oct 06, 2017 2:18 am
- Location: N. Lincs, UK
- Contact:
Welly boot rack with integral scraper
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 3.5 Star Elite Contributing Member
- Posts: 628
- Joined: Fri Jan 16, 2009 10:26 pm
Re: Welly boot rack with integral scraper
Thanks for sharing
-
- 2 Star Elite Contributing Member
- Posts: 67
- Joined: Fri Oct 06, 2017 2:18 am
- Location: N. Lincs, UK
- Contact:
Re: Welly boot rack with integral scraper
No problem