It is currently Thu Oct 18, 2018 5:34 am

 

Another weld jig

DXF Art Sharing Forum is for sharing dxf, plt, or any other vector file for plasma cutting. Browse what others have posted or post some DXF art files of your own.
User avatar
Scratch
Elite Contributing Member
Elite Contributing Member
Posts: 494
Joined: Tue Sep 01, 2009 9:07 pm
Location: Hudson,WI
Contact:

Another weld jig

Postby Scratch » Thu Apr 19, 2018 7:12 pm

Finally got some time to weld one of these suckers up. I know there are a few different designs of these on here, so I thought I'd throw in the design I like best, maybe someone else will like it. It's super simple and you all can probably draw it up yourself, but I thought I'd share it anyways because sharing is caring right?

I didn't want the holes in it since I figure I'd be clamping it to the table anyways. I did want to be able to fit a vice grip in there... hence the slots. It's 1/4"x4"x12"x12", and the center "web" is in the center of the jig, not flush on the flat edge like some.
Enjoy!
(There are two of the center pieces in the drawing because waste is bad)
Image
2.jpg

3.jpg

Screenshot (23).png

12x12x4square.CDR

12x12x4square.DXF

You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members. Click Here

Last edited by Scratch on Thu Apr 19, 2018 7:28 pm, edited 1 time in total.
I think I'm the oldest 10 year old boy on the forum...

plasmanewbie
Elite Contributing Member
Elite Contributing Member
Posts: 403
Joined: Thu Jul 24, 2008 11:15 am

Re: Another weld jig

Postby plasmanewbie » Thu Apr 19, 2018 7:21 pm

Pretty sweet Scratch. Sharing is caring :D Thank you!

User avatar
otisa2007
Elite Contributing Member
Elite Contributing Member
Posts: 368
Joined: Thu Apr 04, 2013 6:59 pm
Location: mt pleasant texas
Contact:

Re: Another weld jig

Postby otisa2007 » Thu Apr 19, 2018 7:32 pm

nice thankyou

whiskeymike
Elite Contributing Member
Elite Contributing Member
Posts: 317
Joined: Mon Feb 23, 2015 5:23 pm
Location: Austin, TX

Re: Another weld jig

Postby whiskeymike » Thu Apr 19, 2018 11:33 pm

Nice, thanks for sharing. Have you considered using notches or cutting the corner off so you access inside corner for welding?

Old Iron
Elite Contributing Member
Elite Contributing Member
Posts: 439
Joined: Wed Nov 26, 2014 5:12 pm

Re: Another weld jig

Postby Old Iron » Fri Apr 20, 2018 12:09 am

Thanks for sharing.
Unfortunately my Qcad won't let me work with it.

Rex
Posts: 63
Joined: Sat Oct 08, 2016 12:26 pm

Re: Another weld jig

Postby Rex » Fri Jun 15, 2018 6:10 pm

Thanks I can use that

[email protected]
Posts: 23
Joined: Mon May 07, 2018 5:27 pm
Location: Moose Jaw Sask.

Re: Another weld jig

Postby [email protected] » Fri Jun 15, 2018 7:51 pm

thanks a lot, looks like another useful tool.

Searchman
Posts: 193
Joined: Tue Aug 18, 2015 11:30 am

Re: Another weld jig

Postby Searchman » Sun Jun 17, 2018 11:49 am

A very useful share. Thanks

sunnybunny
Posts: 50
Joined: Tue Apr 11, 2017 8:43 pm
Location: Globe AZ

Re: Another weld jig

Postby sunnybunny » Thu Jul 19, 2018 7:58 am

Thanks

shalfpap
Posts: 72
Joined: Wed Jul 13, 2011 6:15 pm

Re: Another weld jig

Postby shalfpap » Thu Jul 19, 2018 3:57 pm

:mrgreen: Thanks for sharing!!

mayper
Posts: 249
Joined: Tue Feb 07, 2012 1:46 am
Location: Australia
Contact:

Re: Another weld jig

Postby mayper » Fri Jul 20, 2018 10:45 pm

Thanks for sharing

User avatar
SlagBandit
Elite Contributing Member
Elite Contributing Member
Posts: 62
Joined: Thu Apr 14, 2011 8:32 pm

Re: Another weld jig

Postby SlagBandit » Mon Jul 30, 2018 11:11 am

Good idea! Thank you !
Torchmate 4x4 Growth Series
Hypertherm Powermax 45
Torchmate 1 5x10
Hypertherm Powermax 85
Miller 225 MIG
Miller 210 Syncrowave TIG


Return to “DXF Art - DXF Clip Art File Sharing Forum”

Who is online

Users browsing this forum: No registered users and 21 guests

Easyscriber engrave attachment for Hypertherm torch's