Look for alternator mount

Monty prince · Post by **Monty prince** » Thu Feb 04, 2016 9:41 pm

Looking for some Sbc alternator mounts

james.davis · Post by **james.davis** » Fri Feb 05, 2016 7:22 am

?
Jim

seajinx · Post by **seajinx** » Fri Feb 05, 2016 7:33 am

Have you tried Auto Zone? Just kidding, did you have something in mind like for a custom bracket or just a standard off the shelf one

Post by **sphurley** » Fri Feb 05, 2016 8:11 am

Jim, Small Block Chevy.... The old were terrible for breaking.

Post by **sphurley** » Fri Feb 05, 2016 8:12 am

Oh and here:
https://grabcad.com/library/tag/chevy

Monty prince · Post by **Monty prince** » Fri Feb 05, 2016 12:39 pm

Was looking for something custom came up with this last night thank it's going to work

_Ogre · Post by **_Ogre** » Fri Feb 05, 2016 8:18 pm

and he didn't post the file

Monty prince · Post by **Monty prince** » Fri Feb 05, 2016 10:09 pm

Will post file tomorrow

kkroger · Post by **kkroger** » Sat Feb 06, 2016 9:45 am

I did this one for my brother in law's drag car, stemming from my first real use of "Scanything" I scanned his original POS which was broken and I had re-welded it several times, just too thin for his setup,

so I did this one as an upgrade to that one. after seeing his installation I made the adjuster bracket too...

_Ogre · Post by **_Ogre** » Sat Feb 06, 2016 11:50 am

nice work kkroger, i like parts that are practical

kkroger · Post by **kkroger** » Sat Feb 06, 2016 10:54 pm

Then you will like this one too _Ogre
He brought me this....

So I made him this

Poh · Post by **Poh** » Mon Feb 08, 2016 11:50 am

I have one like this, SBC mid mount long pump

sbc long pump alt mount.dxf

Poh · Post by **Poh** » Mon Feb 08, 2016 1:12 pm

I should say it should be cut out of .25", the smaller bracket goes in front of the waterpump mounting holes, and you may have to polish the housing down a bit for a perfect fit. I did anyhow.

_Ogre · Post by **_Ogre** » Tue Feb 09, 2016 3:49 pm

nice work poh
thanks for the file

i wish we had the plasma table when i built my 58 truk
i would have done everything on the table
instead of cutting them out with the grinder and drill

Poh · Post by **Poh** » Tue Feb 09, 2016 5:02 pm

_Ogre wrote:nice work poh
thanks for the file

i wish we had the plasma table when i built my 58 truk
i would have done everything on the table
instead of cutting them out with the grinder and drill

Thanks Ogre, My latest build is how I learned my software and table... If only I had it for the previous vehicles

Model A SportCoupe.jpg

DragstripZombies · Post by **DragstripZombies** » Tue Jul 07, 2020 5:23 am

Poh wrote: ↑Mon Feb 08, 2016 11:50 am I have one like this, SBC mid mount long pumpMid mount sbc with long pump.JPG

What’s the difference in the mounts for short to long water pump I have a short and want to make the same mid mount bracket. Is it just the bolts and spacers

Post by **adbuch** » Tue Jul 07, 2020 6:05 am

Perhaps these drawings will help.
David

SBC short vs long water pump dimensions.jpg

Post by **Red6rubicon** » Tue Jul 07, 2020 10:07 pm

Monty prince wrote: ↑Fri Feb 05, 2016 12:39 pm Was looking for something custom came up with this last night thank it's going to work

What's up with the valve covers?

Post by **kbenz** » Fri Jul 24, 2020 4:56 pm

Monty prince wrote: ↑Fri Feb 05, 2016 10:09 pm Will post file tomorrow

Never did post that dxf....

Post by **kbenz** » Fri Jul 24, 2020 4:58 pm

_Ogre wrote: ↑Tue Feb 09, 2016 3:49 pm nice work poh
thanks for the file

i wish we had the plasma table when i built my 58 truk
i would have done everything on the table
instead of cutting them out with the grinder and drill

Got a layout on that power steering bracket?

Look for alternator mount

Look for alternator mount

Re: Look for alternator mount

Re: Look for alternator mount

Re: Look for alternator mount

Re: Look for alternator mount

Re: Look for alternator mount

Re: Look for alternator mount

Re: Look for alternator mount

Re: Look for alternator mount

Re: Look for alternator mount

Re: Look for alternator mount

Re: Look for alternator mount

Re: Look for alternator mount

Re: Look for alternator mount

Re: Look for alternator mount

Re: Look for alternator mount

Re: Look for alternator mount

Re: Look for alternator mount

Re: Look for alternator mount

Re: Look for alternator mount