It is currently Thu Oct 18, 2018 11:32 pm

 

Fan Clutch Spanners

DXF Art Sharing Forum is for sharing dxf, plt, or any other vector file for plasma cutting. Browse what others have posted or post some DXF art files of your own.
SSLLC
Posts: 15
Joined: Mon Jun 16, 2014 7:10 pm

Fan Clutch Spanners

Postby SSLLC » Sun May 10, 2015 7:31 pm

Metric and Standard. Need to adjust your kerf offset accordingly.

Image
Fan Clutch Wrenchs STD and MET.dxf

You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members. Click Here

Andrew Spurr Owner of SS LLC Est. 2011

Miller Millermatic 252, Miller Millermatic 212 Autoset, Miller Bobcat 225, Miller Syncrowave 210
Lincoln LN25
JD2 Programmable Bender
Thermodynamics 42
Hypertherm 45, 65 with machine torch
Trucut Series One 4x8

User avatar
Zippo
Elite Contributing Member
Elite Contributing Member
Posts: 1614
Joined: Fri Mar 04, 2011 12:49 pm
Location: Minnesota Based
Contact:

Re: Fan Clutch Spanners

Postby Zippo » Tue May 12, 2015 1:26 pm

Thanks for posting.

User avatar
someguy
Posts: 80
Joined: Mon Jul 30, 2012 5:38 pm
Location: San Antonio, TX

Re: Fan Clutch Spanners

Postby someguy » Tue May 12, 2015 3:40 pm

Very handy, thanks for the post.

User avatar
little blue choo
Elite Contributing Member
Elite Contributing Member
Posts: 1448
Joined: Mon Mar 02, 2015 10:38 pm
Location: Cherryville NC
Contact:

Re: Fan Clutch Spanners

Postby little blue choo » Tue May 12, 2015 9:23 pm

OK, I own a auto repair shop and have been a ASE certified Master Tech for over 40 years. I own and use fan clutch wrenches on a regular basis but don't under stand the hook on the end. Can someone help me here? I know I must be missing something. Not blond but I am getting old. LOL
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape

rockstar metalworks
Posts: 3
Joined: Sat Jun 16, 2012 2:20 am

Re: Fan Clutch Spanners

Postby rockstar metalworks » Tue May 12, 2015 9:56 pm

It's for using an air hammer to break the fan nut loose and tighten it without having to hold the fan clutch from rotating. Just put the wrench on in the right orientation and put your air hammer in the hook, hit it with a couple of quick bursts from the air hammer and the fan will come loose. Great tools. Built one for a buddy of mine that works for GM and he loves it. You can also add in your initials when cutting just to guarantee it doesn't find a new home!

User avatar
little blue choo
Elite Contributing Member
Elite Contributing Member
Posts: 1448
Joined: Mon Mar 02, 2015 10:38 pm
Location: Cherryville NC
Contact:

Re: Fan Clutch Spanners

Postby little blue choo » Tue May 12, 2015 10:06 pm

Why did I not know that. I saw this system in one of our trade mag's a year or so ago. Like I said, I'm getting OLD! LOL
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape

Corfabrication
Posts: 147
Joined: Mon Nov 03, 2014 2:04 pm
Location: Racine Wi
Contact:

Re: Fan Clutch Spanners

Postby Corfabrication » Tue May 12, 2015 11:11 pm

Awesome file. Thanks for the share

teachag
Posts: 14
Joined: Sun Nov 03, 2013 11:16 pm
Location: Linden California

Re: Fan Clutch Spanners

Postby teachag » Mon Jun 01, 2015 6:58 pm

I just changed the water pump on my 7.3l Ford and had to borrow one from a student. Reverse engineering his was on my list to do but now I will not have to. Thank you very much. I also like the air hammer hook. His did not have that. These things are a life saver.

gwt181
Posts: 28
Joined: Mon Feb 02, 2015 9:38 am
Location: Denham Springs, Louisiana

Re: Fan Clutch Spanners

Postby gwt181 » Tue Jun 02, 2015 7:30 pm

Thank you

Largemouthlou
Elite Contributing Member
Elite Contributing Member
Posts: 1372
Joined: Mon Aug 30, 2010 5:56 am
Location: Palm Bch Gardens Fl
Contact:

Re: Fan Clutch Spanners

Postby Largemouthlou » Wed Jun 03, 2015 6:00 am

Great file!! Thanks
1250 hypertherm
4 X 8 Precision Plasma
CandCnC electronics

dustyscustomwelding
Posts: 12
Joined: Sat Mar 26, 2016 11:18 pm
Location: South Dakota
Contact:

Re: Fan Clutch Spanners

Postby dustyscustomwelding » Tue Jun 21, 2016 1:12 pm

I just cut and used these! AMAZING! Thank you so much!
Dusty
Owner
Dusty's Custom Welding and Fabrication
https://www.facebook.com/Dustyscustomwelding/

teachag
Posts: 14
Joined: Sun Nov 03, 2013 11:16 pm
Location: Linden California

Re: Fan Clutch Spanners

Postby teachag » Tue Jun 21, 2016 1:28 pm

What thickness of metal do you use? I was thinking of 10 ga. Thank you

MetalTorcher
Posts: 450
Joined: Sun Sep 08, 2013 2:17 pm
Location: Manitoba

Re: Fan Clutch Spanners

Postby MetalTorcher » Tue Jun 21, 2016 1:34 pm

teachag wrote:What thickness of metal do you use? I was thinking of 10 ga. Thank you

I would go with 1/4" or 3/16" at the very least. I'd be afraid 10 ga might spread apart. Some of those fan clutches can be pretty tight!
Jason Lyon
PlasmaCAM DHC2
Advanced DesignEdge
Hypertherm Powermax 1000
Duramax mini torch with Snap n Cut
Everlast PowerMTS 251si
Torturing metal since 2014

User avatar
little blue choo
Elite Contributing Member
Elite Contributing Member
Posts: 1448
Joined: Mon Mar 02, 2015 10:38 pm
Location: Cherryville NC
Contact:

Re: Fan Clutch Spanners

Postby little blue choo » Tue Jun 21, 2016 3:30 pm

Teachag, I would use tool steel if possible. I cut one out of 1/4 and it spread the first time I used it. Like MetalTorcher said they can be pretty tight. Mine was on a diesel. It worked but I had to use my MAC TOOL one to put it back. Thank goodness I just cut one to try.

Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape

Binderman
Posts: 69
Joined: Wed Jan 07, 2015 7:15 pm
Location: North Central Texas.

Re: Fan Clutch Spanners

Postby Binderman » Mon Aug 06, 2018 6:10 pm

Saved and cut just the 2" one. Added a handle to it and it worked like a charm.

Many thanks!!!

ggeh
Elite Contributing Member
Elite Contributing Member
Posts: 199
Joined: Thu Mar 31, 2016 2:51 pm

Re: Fan Clutch Spanners

Postby ggeh » Tue Aug 07, 2018 7:44 pm

rockstar metalworks wrote:It's for using an air hammer to break the fan nut loose and tighten it without having to hold the fan clutch from rotating. Just put the wrench on in the right orientation and put your air hammer in the hook, hit it with a couple of quick bursts from the air hammer and the fan will come loose. Great tools. Built one for a buddy of mine that works for GM and he loves it. You can also add in your initials when cutting just to guarantee it doesn't find a new home!


Can you post a picture of the air hammer being used with the wrench. I know you explained it above but I just cant picture it. Some times I need to see it being used to understand it.

Thanks Gary

rmac
Posts: 1
Joined: Thu Dec 25, 2014 10:07 am

Re: Fan Clutch Spanners

Postby rmac » Thu Aug 30, 2018 4:42 am

The dxf. file is not downloading onto my computer. How do I download?

thanks!

User avatar
Scratch
Elite Contributing Member
Elite Contributing Member
Posts: 494
Joined: Tue Sep 01, 2009 9:07 pm
Location: Hudson,WI
Contact:

Re: Fan Clutch Spanners

Postby Scratch » Thu Aug 30, 2018 9:00 am

ggeh wrote:
rockstar metalworks wrote:It's for using an air hammer to break the fan nut loose and tighten it without having to hold the fan clutch from rotating. Just put the wrench on in the right orientation and put your air hammer in the hook, hit it with a couple of quick bursts from the air hammer and the fan will come loose. Great tools. Built one for a buddy of mine that works for GM and he loves it. You can also add in your initials when cutting just to guarantee it doesn't find a new home!


Can you post a picture of the air hammer being used with the wrench. I know you explained it above but I just cant picture it. Some times I need to see it being used to understand it.

Thanks Gary

You'll have to use the correct chisel tip but here's how you would use it:
Image
I think I'm the oldest 10 year old boy on the forum...

ggeh
Elite Contributing Member
Elite Contributing Member
Posts: 199
Joined: Thu Mar 31, 2016 2:51 pm

Re: Fan Clutch Spanners

Postby ggeh » Thu Aug 30, 2018 12:12 pm

A pictures worth a thousand words. Thanks for taking the time, very helpful I get it now.
Thanks, Gary

RONWB
Posts: 219
Joined: Sun Jul 13, 2014 12:49 pm

Re: Fan Clutch Spanners

Postby RONWB » Thu Sep 20, 2018 3:33 pm

thanks


Return to “DXF Art - DXF Clip Art File Sharing Forum”

Who is online

Users browsing this forum: 9560r, Balvin, Fastyankee, johno down under, tinspark, Uzaree and 23 guests

Easyscriber engrave attachment for Hypertherm torch's