It is currently Thu Oct 18, 2018 10:58 pm

 

6 sided fire pit, dxf and pcm

DXF Art Sharing Forum is for sharing dxf, plt, or any other vector file for plasma cutting. Browse what others have posted or post some DXF art files of your own.
thissideup
Elite Contributing Member
Elite Contributing Member
Posts: 144
Joined: Sun Nov 20, 2011 12:19 am

6 sided fire pit, dxf and pcm

Postby thissideup » Sat Jan 25, 2014 7:35 pm

here it is, enjoy and please post your versions.

Image

6 side fire pit.dxf
6 side fire pit.pcm

You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members. Click Here


MetalTorcher
Posts: 450
Joined: Sun Sep 08, 2013 2:17 pm
Location: Manitoba

Re: 6 sided fire pit, dxf and pcm

Postby MetalTorcher » Sat Jan 25, 2014 8:48 pm

Nifty, thanks for the share!
Jason Lyon
PlasmaCAM DHC2
Advanced DesignEdge
Hypertherm Powermax 1000
Duramax mini torch with Snap n Cut
Everlast PowerMTS 251si
Torturing metal since 2014

Bad Cat2
Posts: 11
Joined: Mon Feb 18, 2013 8:34 pm

Re: 6 sided fire pit, dxf and pcm

Postby Bad Cat2 » Sat Jan 25, 2014 9:11 pm

You are too generous !!! Thank you soo much. I made one of your other fire pits and it turned out so nice. I can't wait to cut one of these.

cbassjr
Elite Contributing Member
Elite Contributing Member
Posts: 303
Joined: Fri Dec 21, 2012 5:21 pm

Re: 6 sided fire pit, dxf and pcm

Postby cbassjr » Sat Jan 25, 2014 9:15 pm

How big is this pit fire box? How much of a 4x8 sheet does it take?

muzza
Elite Contributing Member
Elite Contributing Member
Posts: 1477
Joined: Wed Feb 04, 2009 5:35 pm

Re: 6 sided fire pit, dxf and pcm

Postby muzza » Sat Jan 25, 2014 9:59 pm

Thanks for the share, looks good.
Murray

wickedinhere
Elite Contributing Member
Elite Contributing Member
Posts: 743
Joined: Thu Jun 09, 2011 9:03 pm

Re: 6 sided fire pit, dxf and pcm

Postby wickedinhere » Sat Jan 25, 2014 10:29 pm

Nice, what angle is the bend?

thissideup
Elite Contributing Member
Elite Contributing Member
Posts: 144
Joined: Sun Nov 20, 2011 12:19 am

Re: 6 sided fire pit, dxf and pcm

Postby thissideup » Sat Jan 25, 2014 10:48 pm

wickedinhere wrote:Nice, what angle is the bend?


google sketch up says it's 124.8 but i just bend by eye so i can't confirm.

User avatar
MetalheadRK
Posts: 292
Joined: Fri Mar 23, 2012 4:44 pm

Re: 6 sided fire pit, dxf and pcm

Postby MetalheadRK » Sun Jan 26, 2014 1:05 am

Very nice! Thanks for sharing.
4x4 PlasmaCam
Hypertherm 45
Eastwood 175 MIG welder

starr_motorsports
Posts: 18
Joined: Tue Nov 05, 2013 4:56 am

Re: 6 sided fire pit, dxf and pcm

Postby starr_motorsports » Sun Jan 26, 2014 5:35 am

How big across is this one?

thissideup
Elite Contributing Member
Elite Contributing Member
Posts: 144
Joined: Sun Nov 20, 2011 12:19 am

Re: 6 sided fire pit, dxf and pcm

Postby thissideup » Sun Jan 26, 2014 10:53 am

starr_motorsports wrote:How big across is this one?

36 across the points, 32 across the flats

sbest1
Elite Contributing Member
Elite Contributing Member
Posts: 477
Joined: Fri Jan 16, 2009 10:26 pm

Re: 6 sided fire pit, dxf and pcm

Postby sbest1 » Sun Jan 26, 2014 11:20 am

Sweet, thanks!

User avatar
weldor2005
Elite Contributing Member
Elite Contributing Member
Posts: 357
Joined: Fri Mar 01, 2013 4:22 pm
Location: Southern Kansas City Area
Contact:

Re: 6 sided fire pit, dxf and pcm

Postby weldor2005 » Sun Jan 26, 2014 5:04 pm

I like it, but for the numbers, you spend more time welding on this one. Though you might have a higher premium with 6 customizable sides.
David Finch CWI

Plenty of welders
Plasmacam 4x4 with DHC2
PowerMax 45
Lots of other toys

User avatar
TEXRAMSEY
Posts: 8
Joined: Thu Dec 02, 2010 11:06 am

Re: 6 sided fire pit, dxf and pcm

Postby TEXRAMSEY » Mon Apr 14, 2014 8:37 pm

I like the fire pit. Will be trying it soon. Thanks

User avatar
yeomansjon
Elite Contributing Member
Elite Contributing Member
Posts: 332
Joined: Fri Oct 05, 2012 1:28 pm
Contact:

Re: 6 sided fire pit, dxf and pcm

Postby yeomansjon » Tue Apr 15, 2014 8:57 am

Looks great! I like the lettering, what font did you use?
Fast Jonny Custom Design
CNC Plasma Cutting
Plasmacam DHC
Hypertherm Powermax 1000
www.facebook.com/fastjonnycustomdesign

User avatar
CNCCAJUN
Elite Contributing Member
Elite Contributing Member
Posts: 1116
Joined: Mon Dec 26, 2011 11:38 pm
Location: Baton Rouge, LA

Re: 6 sided fire pit, dxf and pcm

Postby CNCCAJUN » Tue Apr 15, 2014 11:15 am

thissideup wrote:
wickedinhere wrote:Nice, what angle is the bend?


google sketch up says it's 124.8 but i just bend by eye so i can't confirm.


Would that also be a 55.2 degree bend?

Steve :D
Smiling Gator Metal Works, LLC
Dynatorch 4X4 XLS
PowerMAX 85
Baton Rouge, Louisiana

No Class
Posts: 53
Joined: Thu Jan 09, 2014 9:33 pm

Re: 6 sided fire pit, dxf and pcm

Postby No Class » Fri Apr 18, 2014 6:46 pm

Here are a couple some students made. Made a slightly smaller version also. Great file thanks for sharing. Is $100 for blasting and ceramic coating reasonable?
image.jpg

You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members. Click Here


MGardner
Posts: 72
Joined: Wed Feb 05, 2014 5:17 pm
Location: Dallas Texas

Re: 6 sided fire pit, dxf and pcm

Postby MGardner » Sat Apr 19, 2014 8:34 pm

Does the ceramic coating hold up better to the heat? I was going to use flat black high temp spray paint?

thissideup
Elite Contributing Member
Elite Contributing Member
Posts: 144
Joined: Sun Nov 20, 2011 12:19 am

Re: 6 sided fire pit, dxf and pcm

Postby thissideup » Sat Apr 19, 2014 9:56 pm

yeomansjon wrote:Looks great! I like the lettering, what font did you use?

honestly I have no idea, I just scroll through the fonts till i find one I like.

thissideup
Elite Contributing Member
Elite Contributing Member
Posts: 144
Joined: Sun Nov 20, 2011 12:19 am

Re: 6 sided fire pit, dxf and pcm

Postby thissideup » Sat Apr 19, 2014 9:57 pm

No Class wrote:
image.jpg
Here are a couple some students made. Made a slightly smaller version also. Great file thanks for sharing. Is $100 for blasting and ceramic coating reasonable?

absolutely, I wont start my sand blaster for less than $100.

User avatar
tnbndr
Elite Contributing Member
Elite Contributing Member
Posts: 1413
Joined: Mon Jan 09, 2012 4:30 pm
Location: New Berlin, WI
Contact:

Re: 6 sided fire pit, dxf and pcm

Postby tnbndr » Sun Apr 20, 2014 9:57 am

$100 for blasting and ceramic coating is almost like free.!!
Do it and let us know how the ceramic holds up to the heat. They use it on engines and exhaust systems so I would assume it will be fine.
Dennis
LDR 4x8, Scribe, DTHCIV
PM45
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
[email protected], [email protected]
Miller 211
RW 390E Slip Roll
AutoCAD, SheetCAM, Mach 3
https://www.facebook.com/ikescreations?ref=hl
http://ikescreations.com

gocanes719
Posts: 38
Joined: Thu Dec 04, 2008 11:52 am

Re: 6 sided fire pit, dxf and pcm

Postby gocanes719 » Wed Apr 30, 2014 8:17 am

Is this file missing the base at the bottom?

doggone
Posts: 46
Joined: Mon Jan 20, 2014 12:58 pm

Re: 6 sided fire pit, dxf and pcm

Postby doggone » Sat May 31, 2014 10:25 pm

Thanks for sharing going to give it a shot.
Andy

smazeppa
Posts: 1
Joined: Thu Sep 24, 2009 11:51 am

Re: 6 sided fire pit, dxf and pcm

Postby smazeppa » Fri Jun 27, 2014 1:23 am

Hi, thanks for sharing the 6 sided fire pit. It is awesome. I just cut it out tonight, but I am having a hard time getting the sides to match together nice. Does anyone know what the bend is on this firepit? I will post a picture once I get it all together. It is customized on the top side and the bottom. Turned out really nice, if I can just get the right angle for the bend. Thanks for any help that anyone can give me. :)

gcw8
Posts: 328
Joined: Thu Mar 08, 2012 9:41 am
Location: Hickson Ontario Canada
Contact:

Re: 6 sided fire pit, dxf and pcm

Postby gcw8 » Sun Jun 29, 2014 8:55 pm

very very nice thank you
Greg From Storiesnsteel

Countrylane
Posts: 181
Joined: Wed Jan 20, 2010 6:55 pm
Location: Canada

Re: 6 sided fire pit, dxf and pcm

Postby Countrylane » Wed Jul 02, 2014 10:04 pm

Just completed a fire pit with this dxf, some customization was done with words around the base. I set the protractor to be 125 degrees around the outside radius of bends, worked out perfectly!!! Thanks a lot!!! It is more welding but it could also be made from left over scraps from other projects, so that is a bonus!!
Countrylane Metal Art Work


Return to “DXF Art - DXF Clip Art File Sharing Forum”

Who is online

Users browsing this forum: bdeihl570, Fastyankee, Mesquite, SpaceMonkey, tinspark, towman1002 and 17 guests

Easyscriber engrave attachment for Hypertherm torch's