Random Files
- RobinHillMachine
- 3 Star Member
- Posts: 310
- Joined: Mon Sep 19, 2016 1:32 pm
- Location: Pennsylvania
- Contact:
Random Files
I did a free Robin Hill Machine file hour yesterday. Here are the files I drew.
A variety of cars, trucks, race car, dog, heart tree, mountain range.
Some files have drop outs. Bridge, adjust, and check spacing before cutting.
A variety of cars, trucks, race car, dog, heart tree, mountain range.
Some files have drop outs. Bridge, adjust, and check spacing before cutting.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
- Larry83301
- 5 Star Elite Contributing Member
- Posts: 2648
- Joined: Tue Oct 27, 2009 6:36 pm
- Location: Twin Falls, Idaho
Re: Random Files
Thanks for the free files!
Larry
Larry
- Joe Jones
- 5 Star Elite Contributing Member
- Posts: 3119
- Joined: Sat Oct 11, 2014 2:33 pm
- Location: Franklin, KY., USA
- Contact:
Re: Random Files
Tell me more about this "free Robin Hill Machine file hour"RobinHillMachine wrote: ↑Mon Dec 05, 2022 12:46 pm I did a free Robin Hill Machine file hour yesterday. Here are the files I drew.
A variety of cars, trucks, race car, dog, heart tree, mountain range.
Some files have drop outs. Bridge, adjust, and check spacing before cutting.
Joe
Franklin, KY., USA
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
-
- 6 Star Elite Contributing Member
- Posts: 8684
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: Random Files
Thanks for the file share! You are pretty fast if you manually traced all of these in an hour. It would probably take me an hour just to trace one of them.
Nice work.
David
Nice work.
David
-
- 2.5 Star Member
- Posts: 245
- Joined: Wed Aug 24, 2022 2:48 pm
Re: Random Files
Thanks for sharing .
- Joe Jones
- 5 Star Elite Contributing Member
- Posts: 3119
- Joined: Sat Oct 11, 2014 2:33 pm
- Location: Franklin, KY., USA
- Contact:
Re: Random Files
You did not draw those files in an hour.RobinHillMachine wrote: ↑Mon Dec 05, 2022 12:46 pm I did a free Robin Hill Machine file hour yesterday. Here are the files I drew.
A variety of cars, trucks, race car, dog, heart tree, mountain range.
Some files have drop outs. Bridge, adjust, and check spacing before cutting.
Joe
Franklin, KY., USA
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
- RobinHillMachine
- 3 Star Member
- Posts: 310
- Joined: Mon Sep 19, 2016 1:32 pm
- Location: Pennsylvania
- Contact:
Re: Random Files
Once a month I host a free file hour in a Plasma Facebook group. I draw all the files as quickly as humanly possible, thus there may be errors in the designs.
- RobinHillMachine
- 3 Star Member
- Posts: 310
- Joined: Mon Sep 19, 2016 1:32 pm
- Location: Pennsylvania
- Contact:
Re: Random Files
I spent about 2 hours this time. I usually do 1 hour time limit but it's before the holidays so I wanted to help more people.
- RobinHillMachine
- 3 Star Member
- Posts: 310
- Joined: Mon Sep 19, 2016 1:32 pm
- Location: Pennsylvania
- Contact:
Re: Random Files
No, it took 2 hours to draw them. I just call it the "Robin Hill Machine Free File Hour". I go as long as I feel like that day.
- Joe Jones
- 5 Star Elite Contributing Member
- Posts: 3119
- Joined: Sat Oct 11, 2014 2:33 pm
- Location: Franklin, KY., USA
- Contact:
Re: Random Files
Words mean things. "Draw" is not the same thing as TRACE, or COPY. I contend that no one can DRAW this collection of graphics from scratch in two hours time.RobinHillMachine wrote: ↑Tue Dec 06, 2022 1:00 pm
No, it took 2 hours to draw them. I just call it the "Robin Hill Machine Free File Hour". I go as long as I feel like that day.
Joe
Franklin, KY., USA
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
-
- 6 Star Elite Contributing Member
- Posts: 8684
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: Random Files
Thanks Julie! I can see that - I know you've been doing this for years and as I recall you are using an older version of CorelDraw. Call it drawing, tracing, or whatever - just a huge difference in skill level between someone with your experience and us other Plasmacam Design Edge guys. Actually the main reason I purchased Coreldraw 2020 about a year ago is because of its awesome tracing tool - much faster than Design Edge. Always have to keep all your options open. Now all I have to do is practice.RobinHillMachine wrote: ↑Tue Dec 06, 2022 12:59 pmI spent about 2 hours this time. I usually do 1 hour time limit but it's before the holidays so I wanted to help more people.
David
- djreiswig
- 4.5 Star Elite Contributing Member
- Posts: 1942
- Joined: Thu Nov 19, 2015 10:02 pm
- Location: SE Nebraska
Re: Random Files
Joe must be off his meds again today.Joe Jones wrote: ↑Tue Dec 06, 2022 1:41 pmWords mean things. "Draw" is not the same thing as TRACE, or COPY. I contend that no one can DRAW this collection of graphics from scratch in two hours time.RobinHillMachine wrote: ↑Tue Dec 06, 2022 1:00 pm
No, it took 2 hours to draw them. I just call it the "Robin Hill Machine Free File Hour". I go as long as I feel like that day.
Joe
Don't let him bother you. Those files look great, Julie. Thanks for all you do for the group.
2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
- tinspark
- 3.5 Star Elite Contributing Member
- Posts: 657
- Joined: Wed May 30, 2018 4:28 pm
Re: Random Files
Thanks for the files and the laugh fellas.
This is one of my favorite places on the net.
I wish that I could draw/trace that fast Julie
But more impressive to me is your generosity to help others!!
This is one of my favorite places on the net.
I wish that I could draw/trace that fast Julie
But more impressive to me is your generosity to help others!!
Doug,
4x4 GoTorch- expanded
Height Control/Advanced DesignEdge
Hypertherm 45XP-
Logan Lathe + myriads of other shop toys
**CAUTION**- "Does Not Play Well With Others"
4x4 GoTorch- expanded
Height Control/Advanced DesignEdge
Hypertherm 45XP-
Logan Lathe + myriads of other shop toys
**CAUTION**- "Does Not Play Well With Others"
-
- 6 Star Elite Contributing Member
- Posts: 8684
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: Random Files
Yup - just gotta laugh!! It's great to have a little bit of humor once in a while.
I think we all wish we could draw as fast (and well) as Julie.
David
I think we all wish we could draw as fast (and well) as Julie.
David
- Joe Jones
- 5 Star Elite Contributing Member
- Posts: 3119
- Joined: Sat Oct 11, 2014 2:33 pm
- Location: Franklin, KY., USA
- Contact:
Re: Random Files
I didn't say there was anything wrong with the files. They are NICE files. I am saying, no one draws those 11 designs from SCRATCH in two hours.
Joe
Franklin, KY., USA
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
- Joe Jones
- 5 Star Elite Contributing Member
- Posts: 3119
- Joined: Sat Oct 11, 2014 2:33 pm
- Location: Franklin, KY., USA
- Contact:
Re: Random Files
Some of us can. We don't post our work unless we are willing to release it to the public domain.
Again ... there is a big difference between DRAWING something and TRACING something. I have no doubt that she could trace these 11 designs in two hours or less. It would not even take me that long to trace them. Of course, it opens up the question of the original source, and Copyright issues. Just because I can find something on the Internet or pull a file from some library of artwork and TRACE it, and then post it to a forum like plasmaspider does not mean it is now a FREE file. It only means that the person who traced and shared it does not control the Copyright.
I am not at all surprised by people who are amused by the blatant and unauthorized duplication of intellectual property.
Joe
Franklin, KY., USA
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!
It is more fun when it isn't necessary!
-
- 4 Star Elite Contributing Member
- Posts: 800
- Joined: Mon Dec 26, 2011 8:37 pm
- Location: Southeast Missouri
Re: Random Files
OH GOOD GRIEF, JOE! Give her a break!
Thank you ever so much Julie.
Allen
Thank you ever so much Julie.
Allen
-
- 6 Star Elite Contributing Member
- Posts: 8684
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: Random Files
....................
- cstroke
- 3 Star Elite Contributing Member
- Posts: 405
- Joined: Thu May 24, 2012 7:45 pm
Re: Random Files
Yes thank you for the files.
6’x12’ Dynatorch powermax 85
12’ Wysong brake
5’x 5/16’ wysong rolls
3.8’x10’ shear
65 Ton ironworker
Boss laser 3655 150 watt CO2.
SFX 100watt Mopa
Quicncy 7.5hp
Square wave tig, Multimatics, Miller bobcat efi.
12’ Wysong brake
5’x 5/16’ wysong rolls
3.8’x10’ shear
65 Ton ironworker
Boss laser 3655 150 watt CO2.
SFX 100watt Mopa
Quicncy 7.5hp
Square wave tig, Multimatics, Miller bobcat efi.
-
- 2.5 Star Member
- Posts: 245
- Joined: Wed Aug 24, 2022 2:48 pm
Re: Random Files
Thanks for the files was working on dog project and yours really helped
-
- 3 Star Elite Contributing Member
- Posts: 443
- Joined: Sat Nov 11, 2017 8:57 am
- Location: Wisconsin
- RobinHillMachine
- 3 Star Member
- Posts: 310
- Joined: Mon Sep 19, 2016 1:32 pm
- Location: Pennsylvania
- Contact:
Re: Random Files
I draw based on photos. I DRAW. DDDDRRRAAAAAWWWW. I'm not using an auto converter. Not running a trace program and cleaning lines.
Sorry that I'm faster than you and your feelings got hurt. Some people are just better than you. Learn to accept it.
/mic drop
- RobinHillMachine
- 3 Star Member
- Posts: 310
- Joined: Mon Sep 19, 2016 1:32 pm
- Location: Pennsylvania
- Contact:
Re: Random Files
I love Corel! I use x7. I've considered upgrading to a newer version but they newer model doesn't offer anything new that I need.adbuch wrote: ↑Tue Dec 06, 2022 4:04 pm Thanks Julie! I can see that - I know you've been doing this for years and as I recall you are using an older version of CorelDraw. Call it drawing, tracing, or whatever - just a huge difference in skill level between someone with your experience and us other Plasmacam Design Edge guys. Actually the main reason I purchased Coreldraw 2020 about a year ago is because of its awesome tracing tool - much faster than Design Edge. Always have to keep all your options open. Now all I have to do is practice.
David
- RobinHillMachine
- 3 Star Member
- Posts: 310
- Joined: Mon Sep 19, 2016 1:32 pm
- Location: Pennsylvania
- Contact:
Re: Random Files
Thank you!
I tried to block him but I don't have that feature on this forum. So I'll just troll him. Should be fun.
- ROKCRLER
- 3 Star Elite Contributing Member
- Posts: 597
- Joined: Sun Sep 30, 2018 5:19 pm
Re: Random Files
RobinHillMachine wrote: ↑Wed Dec 07, 2022 3:08 pmI draw based on photos. I DRAW. DDDDRRRAAAAAWWWW. I'm not using an auto converter. Not running a trace program and cleaning lines.
Sorry that I'm faster than you and your feelings got hurt. Some people are just better than you. Learn to accept it.
/mic drop
4x8 Dynatorch
PM85
~Mo~
PM85
~Mo~