Image
October EasyScriber Giveaway
Industry Pros use FastCut CNC

Tight bender dies for press brake

Share, browse, & download dxf, svg, or other vector based designs. If you take be sure to give back.
Post Reply
tc4x4
1/2 Star Elite Contributing Member
1/2 Star Elite Contributing Member
Posts: 2
Joined: Sun Dec 18, 2016 5:59 pm

Tight bender dies for press brake

Post by tc4x4 » Thu Sep 28, 2017 10:16 am

These are some dies i built to allow tighter bending on a single piece.

Image
bender dies.DXF

You do not have access to view or download this file.
Become a Contributing Member to gain access to this feature. Click Here


BAR M
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 424
Joined: Thu Jul 11, 2013 8:46 pm

Re: Tight bender dies for press brake

Post by BAR M » Thu Sep 28, 2017 4:15 pm

thank you very much

Ghettoman
1 Star Member
1 Star Member
Posts: 23
Joined: Mon Jul 10, 2017 2:47 am

Re: Tight bender dies for press brake

Post by Ghettoman » Thu Sep 28, 2017 7:47 pm

Any pics of it in action?

Old Iron
3.5 Star Member
3.5 Star Member
Posts: 677
Joined: Wed Nov 26, 2014 5:12 pm

Re: Tight bender dies for press brake

Post by Old Iron » Thu Sep 28, 2017 11:33 pm

Ghettoman wrote:Any pics of it in action?
I'm in the need to see category too :?

Tugdriver
1/2 Star Member
1/2 Star Member
Posts: 6
Joined: Sat Aug 20, 2016 7:52 pm

Re: Tight bender dies for press brake

Post by Tugdriver » Fri Sep 29, 2017 5:08 pm

Are you laminating several together to make a punch?
LARGE-GOOSENECK.jpg
Like this?
We have done that where I work to make a specific bottoming radius die or a specialty die.
I'm still not sure what the notches are for though.

You do not have access to view or download this file.
Become a Contributing Member to gain access to this feature. Click Here


yroc fab
1 Star Member
1 Star Member
Posts: 21
Joined: Mon May 16, 2016 3:56 am

Re: Tight bender dies for press brake

Post by yroc fab » Mon Oct 02, 2017 2:56 am

The notches look like they are there to run a bead across them to weld the plates together.

Tugdriver
1/2 Star Member
1/2 Star Member
Posts: 6
Joined: Sat Aug 20, 2016 7:52 pm

Re: Tight bender dies for press brake

Post by Tugdriver » Mon Oct 02, 2017 5:26 pm

The notches look like they are there to run a bead across them to weld the plates together.
Excellent point. I think you are correct. I forgot about that.

T Wayne
1/2 Star Member
1/2 Star Member
Posts: 2
Joined: Tue Feb 16, 2016 12:57 pm

Re: Tight bender dies for press brake

Post by T Wayne » Mon Oct 02, 2017 8:12 pm

Good point, I thought maybe they were clearance for a piece of round stock to weld across.

tjenus
2.5 Star Member
2.5 Star Member
Posts: 183
Joined: Mon Jun 06, 2011 11:14 am
Location: Kelso

Re: Tight bender dies for press brake

Post by tjenus » Thu Oct 05, 2017 7:43 am

they work quite well, I just been throwing them in on any extra sheets, not to concerned about the thickness of the plate either because of the lamination, thanks KH
5x10 Flow Waterjet

Faulknerm
1.5 Star Member
1.5 Star Member
Posts: 25
Joined: Thu Jan 19, 2017 12:47 pm

Re: Tight bender dies for press brake

Post by Faulknerm » Wed Oct 11, 2017 12:34 pm

Thanks for the share! I was just about to draw this up when I stumbled across it

Faulknerm
1.5 Star Member
1.5 Star Member
Posts: 25
Joined: Thu Jan 19, 2017 12:47 pm

Re: Tight bender dies for press brake

Post by Faulknerm » Fri Nov 17, 2017 8:40 am

I had to adjust them a little, but worked great

Davewynes
2.5 Star Elite Contributing Member
2.5 Star Elite Contributing Member
Posts: 176
Joined: Thu Jun 27, 2013 6:37 am

Re: Tight bender dies for press brake

Post by Davewynes » Tue Nov 21, 2017 3:20 am

great file cheers for the share

tc4x4
1/2 Star Elite Contributing Member
1/2 Star Elite Contributing Member
Posts: 2
Joined: Sun Dec 18, 2016 5:59 pm

Re: Tight bender dies for press brake

Post by tc4x4 » Fri Dec 22, 2017 5:51 pm

Sorry, I have been super covered up since I posted this. The notches are for welds, I have several welded together, I have cut several out of 1/2 inch I have them spaced in 1 inch increments i.e. 1", 2", 3". I will get some pictures up some time after Christmas.

weldcutbend
1 Star Member
1 Star Member
Posts: 15
Joined: Tue May 10, 2016 8:01 pm

Re: Tight bender dies for press brake

Post by weldcutbend » Thu Feb 08, 2018 4:44 pm

i would be interested in pics if you have any. my brain isnt firing right for some reason haha...

User avatar
cstroke
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 372
Joined: Thu May 24, 2012 7:45 pm

Re: Tight bender dies for press brake

Post by cstroke » Mon Jul 22, 2019 10:53 am

Raising an old post from the dead..
Any pics of these in action??
Thanks
Chris
6’x12’ Dynatorch with a powermax 85
12’ Wysong brake
5’x 5/16’ wysong rolls
3.8’x10’ Pearson shear
65 Ton Edwards ironworks
Boss laser 3655 150 watt CO2.
Quicncy compressor
Misc welding machines

User avatar
ETCWeld
2.5 Star Elite Contributing Member
2.5 Star Elite Contributing Member
Posts: 234
Joined: Sat Dec 16, 2017 10:45 pm

Re: Tight bender dies for press brake

Post by ETCWeld » Mon Jul 22, 2019 11:44 pm

tc4x4 wrote:
Fri Dec 22, 2017 5:51 pm
I have cut several out of 1/2 inch I have them spaced in 1 inch increments i.e. 1", 2", 3".
I thought i knew what was going on until i read this part.

X53Gunner
1 Star Member
1 Star Member
Posts: 18
Joined: Wed Sep 02, 2020 12:06 am

Re: Tight bender dies for press brake

Post by X53Gunner » Sat Sep 05, 2020 4:35 pm

Thanks a bunch

zoeconner
2.5 Star Elite Contributing Member
2.5 Star Elite Contributing Member
Posts: 104
Joined: Sun Aug 21, 2011 12:41 pm

Re: Tight bender dies for press brake

Post by zoeconner » Mon Sep 07, 2020 2:13 pm

Any pics?

6 cylinder puller
1 Star Member
1 Star Member
Posts: 20
Joined: Sun May 24, 2020 10:13 pm

Re: Tight bender dies for press brake

Post by 6 cylinder puller » Sat Sep 12, 2020 10:55 am

any other dies you have made for the swag off press ??? I wish I would have seen these before I bought my dies

6 cylinder puller
1 Star Member
1 Star Member
Posts: 20
Joined: Sun May 24, 2020 10:13 pm

Re: Tight bender dies for press brake

Post by 6 cylinder puller » Sat Sep 12, 2020 10:56 am

I thought about making a press shear out of it also

WCFields1965
1/2 Star Member
1/2 Star Member
Posts: 1
Joined: Sat Sep 10, 2022 5:38 pm

Re: Tight bender dies for press brake

Post by WCFields1965 » Thu Sep 22, 2022 4:17 pm

Thanks for the files

Post Reply

Return to “DXF Art - DXF Clip Art File Sharing Forum”

Industry Pros use FastCut CNC