Fire Pit/Cooking Goodies Sharing Thread
-
- 2.5 Star Member
- Posts: 119
- Joined: Sun Feb 14, 2016 10:08 am
Re: Fire Pit/Cooking Goodies Sharing Thread
Thanks for all the files !
Hypertherm Powermax 85
Candcnc Electronics
Mach3
SheetcamTNG
Aspire
Candcnc Electronics
Mach3
SheetcamTNG
Aspire
-
- 2.5 Star Member
- Posts: 112
- Joined: Wed Oct 07, 2015 4:33 pm
Re: Fire Pit/Cooking Goodies Sharing Thread
Thank you all, I am still learning basic things but hop to make a surround for our firepit in the cement slab. I have the old software version of pcm (3.11), will that open the design edge pcm files?
-
- 1/2 Star Member
- Posts: 9
- Joined: Thu May 28, 2015 8:01 am
Re: Fire Pit/Cooking Goodies Sharing Thread
a While back I saw the nicest BBQ GRILL with a Texan LONG HORN in the flat grill
does anybody else know what I'm talking about?
would love to see that grill again
many thanks
does anybody else know what I'm talking about?
would love to see that grill again
many thanks
-
- 1/2 Star Member
- Posts: 1
- Joined: Wed Dec 23, 2015 9:55 am
Re: Fire Pit/Cooking Goodies Sharing Thread
ANYBODY KNOW WHAT FONT TYPE THIS IS IN?charlan3 wrote:This is a Baylor University fire pit that I made for a customer.
-
- 2.5 Star Member
- Posts: 105
- Joined: Wed Jun 01, 2016 1:53 pm
Re: Fire Pit/Cooking Goodies Sharing Thread
awesome thanks for sharing
-
- 2 Star Member
- Posts: 60
- Joined: Mon Jul 15, 2013 3:26 pm
- Location: West Michigan
Re: Fire Pit/Cooking Goodies Sharing Thread
Here is an MSU Spartans cooking grate I made for a buddy out of 1/8" stainless. I didn't get a picture before giving it to him. Hope someone can use it or modify to suit your needs.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 2 Star Member
- Posts: 60
- Joined: Mon Jul 15, 2013 3:26 pm
- Location: West Michigan
Re: Fire Pit/Cooking Goodies Sharing Thread
This is a bowl base I offer with my fire rings. I roll and butt weld a 120" strip, making a 38" ring that sets right on top of this elevated base. I don't have a "standard" leg that I use... it depends on the theme of the ring.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 2.5 Star Member
- Posts: 101
- Joined: Fri Aug 21, 2009 7:23 pm
- Location: Texas
Re: Fire Pit/Cooking Goodies Sharing Thread
Great files thanks for the uploads.
- Loyd
- 3.5 Star Elite Contributing Member
- Posts: 686
- Joined: Tue Nov 03, 2009 12:28 am
- Location: Bald Knob, AR
- Contact:
Re: Fire Pit/Cooking Goodies Sharing Thread
Thanks everyone. Great files.
De inimico non loquaris sed cogites
Do not wish ill upon your enemies, plan it.
Do not wish ill upon your enemies, plan it.
-
- 1.5 Star Member
- Posts: 34
- Joined: Sun Oct 25, 2015 7:59 pm
Re: Fire Pit/Cooking Goodies Sharing Thread
kevin53 wrote:I thought that I attached these before. I guess that is what happens when you get old.here are some pics of a couple of pits that I did.
how big is the ring around it
ABLE CUTTING & FABRICATION
torchmate 4800
BATON ROUGE, LA
torchmate 4800
BATON ROUGE, LA
-
- 1.5 Star Member
- Posts: 36
- Joined: Fri Dec 22, 2017 9:50 pm
Re: Fire Pit/Cooking Goodies Sharing Thread
Great Posts Thanks
-
- 1 Star Member
- Posts: 21
- Joined: Sat Jul 14, 2018 7:43 pm
Re: Fire Pit/Cooking Goodies Sharing Thread
Thanks you guys, even though this is like five years later, great resource!
-
- 2 Star Member
- Posts: 55
- Joined: Tue Jul 07, 2015 8:10 am
Re: Fire Pit/Cooking Goodies Sharing Thread
The feet are bent out to far.
LDR 4x8 w scribe
Miller syncrowave 250
Hobart ironman 230
Baliegh tn 250
Bantam 12 ton 48"
JD2 model 32
Miller syncrowave 250
Hobart ironman 230
Baliegh tn 250
Bantam 12 ton 48"
JD2 model 32
-
- 1/2 Star Member
- Posts: 1
- Joined: Sun Mar 10, 2019 5:18 am
Re: Fire Pit/Cooking Goodies Sharing Thread
Does anyone have a blank SVG file of the snap together fire pits? I would like to do some custom collegiate fire pits for a few customers but they want them to be the snap together style so they can take apart for easy hauling while camping. Thanks in advance!
-
- 1 Star Member
- Posts: 12
- Joined: Wed Jun 06, 2018 11:33 am
Re: Fire Pit/Cooking Goodies Sharing Thread
Thanks for the files guys.
-
- 1 Star Member
- Posts: 12
- Joined: Wed Jun 06, 2018 11:33 am
Re: Fire Pit/Cooking Goodies Sharing Thread
As a Buckeyes fan that is great. Any chance I can get the .dxf for the ring?Deuce wrote: ↑Wed Jan 11, 2017 7:23 pm This is a bowl base I offer with my fire rings. I roll and butt weld a 120" strip, making a 38" ring that sets right on top of this elevated base. I don't have a "standard" leg that I use... it depends on the theme of the ring.
OSU fire bowl.JPG
fire bowl.JPG
Fire Ring bowl base plate.dxf
-
- 2 Star Member
- Posts: 60
- Joined: Mon Jul 15, 2013 3:26 pm
- Location: West Michigan
Re: Fire Pit/Cooking Goodies Sharing Thread
dblas wrote: ↑Mon Nov 11, 2019 12:49 pmAs a Buckeyes fan that is great. Any chance I can get the .dxf for the ring?Deuce wrote: ↑Wed Jan 11, 2017 7:23 pm This is a bowl base I offer with my fire rings. I roll and butt weld a 120" strip, making a 38" ring that sets right on top of this elevated base. I don't have a "standard" leg that I use... it depends on the theme of the ring.
OSU fire bowl.JPG
fire bowl.JPG
Fire Ring bowl base plate.dxf
sure, no problem. Ill try to remember when I get home. I've been at FabTech, and I don't have the file on this laptop. if you don't see it within a day, PM me
-
- 2 Star Member
- Posts: 93
- Joined: Wed Aug 25, 2021 12:22 am
Re: Fire Pit/Cooking Goodies Sharing Thread
Will post a dxf of the griddle or "comal" those are nice would like to make one thanks
-
- 2 Star Member
- Posts: 93
- Joined: Wed Aug 25, 2021 12:22 am
Re: Fire Pit/Cooking Goodies Sharing Thread
anyone have a picture to the discada one i mow im late to the party not much to help with but tgans
- tinspark
- 3.5 Star Elite Contributing Member
- Posts: 657
- Joined: Wed May 30, 2018 4:28 pm
Re: Fire Pit/Cooking Goodies Sharing Thread
A lot of guys use tractor plow discs and simply plug the hole and set it over a heat source . Tractor Supply sells them new for a reasonable price. Also, when guys build a smoker, they often cut the bell off of their tank to mount a firebox to a flat surface, and use that end cap as a discada.Squatchemup wrote: ↑Fri Sep 24, 2021 12:54 am anyone have a picture to the discada one i mow im late to the party not much to help with but tgans
Here is a link of a stand someone built for their discada.
https://www.plasmaspider.com/viewtopic. ... ada#p75761
Doug,
4x4 GoTorch- expanded
Height Control/Advanced DesignEdge
Hypertherm 45XP-
Logan Lathe + myriads of other shop toys
**CAUTION**- "Does Not Play Well With Others"
4x4 GoTorch- expanded
Height Control/Advanced DesignEdge
Hypertherm 45XP-
Logan Lathe + myriads of other shop toys
**CAUTION**- "Does Not Play Well With Others"
-
- 6 Star Elite Contributing Member
- Posts: 8683
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: Fire Pit/Cooking Goodies Sharing Thread
"discada" - another term I was not familiar with. Seems like I learn a few new things every day on the forum.
David
David
-
- 2 Star Member
- Posts: 93
- Joined: Wed Aug 25, 2021 12:22 am
Re: Fire Pit/Cooking Goodies Sharing Thread
bad ass man thats really good idea, great i will use this thank you
-
- 2 Star Member
- Posts: 93
- Joined: Wed Aug 25, 2021 12:22 am
Re: Fire Pit/Cooking Goodies Sharing Thread
can anyone help me draw a set up of these to cut for my pits
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 2 Star Member
- Posts: 93
- Joined: Wed Aug 25, 2021 12:22 am
Re: Fire Pit/Cooking Goodies Sharing Thread
maybe a long set to i don't mind paying just need help thank you
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 6 Star Elite Contributing Member
- Posts: 8683
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: Fire Pit/Cooking Goodies Sharing Thread
I have sent you a PM.
David
David