Fajita cooker flat grill

Share, browse, & download dxf, svg, or other vector based designs. If you take be sure to give back.
Ironken
Posts: 228
Joined: Thu Nov 30, 2017 7:29 pm

Re: Fajita cooker flat grill

Post by Ironken » Sat May 11, 2019 2:36 pm

I planned on using 3/16.

User avatar
otisa2007
Elite Contributing Member
Elite Contributing Member
Posts: 396
Joined: Thu Apr 04, 2013 6:59 pm
Location: mt pleasant texas
Contact:

Re: Fajita cooker flat grill

Post by otisa2007 » Sat May 11, 2019 5:33 pm

i build these out of 10ga when designing anything like this i use qcad for the angled top i got the bottom dimension then decided what the top length needed to be and drew them off the centerlines then connect the angle its a crude method but works and i don't have to figure the thickness of the metal knowing that the inside of the metal will meet correctly hope this helps a little

Ironken
Posts: 228
Joined: Thu Nov 30, 2017 7:29 pm

Re: Fajita cooker flat grill

Post by Ironken » Sat May 11, 2019 7:03 pm

otisa2007 wrote:
Sat May 11, 2019 5:33 pm
i build these out of 10ga when designing anything like this i use qcad for the angled top i got the bottom dimension then decided what the top length needed to be and drew them off the centerlines then connect the angle its a crude method but works and i don't have to figure the thickness of the metal knowing that the inside of the metal will meet correctly hope this helps a little

Thank you. I will take a chop at it your way in Draftsight.

Ironken
Posts: 228
Joined: Thu Nov 30, 2017 7:29 pm

Re: Fajita cooker flat grill

Post by Ironken » Sun May 12, 2019 7:42 pm

I found a better solution for myself......try to learn fusion 360. I should be pounding these out in mass quantity in about 2 years after I figure fusion out.......

plasmanewbie
Elite Contributing Member
Elite Contributing Member
Posts: 673
Joined: Thu Jul 24, 2008 11:15 am

Re: Fajita cooker flat grill

Post by plasmanewbie » Mon May 13, 2019 9:02 am

Ironken wrote:
Sun May 12, 2019 7:42 pm
I found a better solution for myself......try to learn fusion 360. I should be pounding these out in mass quantity in about 2 years after I figure fusion out.......
:HaHa :HaHa :HaHa Fusion can be tough but there are lots of videos. Every problem/question I have ever had in Fusion had been solved by a quick video I found with a Google search.

Ironken
Posts: 228
Joined: Thu Nov 30, 2017 7:29 pm

Re: Fajita cooker flat grill

Post by Ironken » Mon May 13, 2019 9:16 am

Thanks Newbie. I have been aksing the all knowing Googler Fusion questions and just as you said....there is always answer. Pretty cool stuff once you get going on it.

sean_cj7
Posts: 3
Joined: Sat Oct 04, 2014 4:47 pm

Re: Fajita cooker flat grill

Post by sean_cj7 » Tue May 14, 2019 12:08 pm

What does everyone do to treat the cooking surface. I'm definitely going to try and get one of these together.

User avatar
otisa2007
Elite Contributing Member
Elite Contributing Member
Posts: 396
Joined: Thu Apr 04, 2013 6:59 pm
Location: mt pleasant texas
Contact:

Re: Fajita cooker flat grill

Post by otisa2007 » Thu May 16, 2019 2:09 pm

I treat mine just like castiron get them good and hot rub some oil into them do my cooking and i dont do any cleaning on it till next time i get ready to use it the two i have of my own i haven't had any rust problems do the same with my grill tops they sit out in the weather most of the time i use a scraper to clean them off when i go to use them and some fresh oil so far seems to work

VPT
Elite Contributing Member
Elite Contributing Member
Posts: 118
Joined: Wed Apr 24, 2013 8:12 am

Re: Fajita cooker flat grill

Post by VPT » Fri May 17, 2019 8:35 am

Nice flat top! Thanks for the share!

I milled out a flat top to use on a 'spare' grill I had.

Image

Post Reply

Return to “DXF Art - DXF Clip Art File Sharing Forum”

Easyscriber engrave attachment for Hypertherm torch's