Rolling dice

Share, browse, & download dxf, svg, or other vector based designs. If you take be sure to give back.
Post Reply
HellfireOffroad
1 Star Member
1 Star Member
Posts: 22
Joined: Mon Sep 10, 2012 6:31 pm
Location: Colorado
Contact:

Rolling dice

Post by HellfireOffroad »

A quick rolling dice file I put together. I haven't had the chance to cut,bend and weld this up yet, Hope to this weekend.

Image
RollingDice.dxf

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

Largemouthlou
4 Star Member
4 Star Member
Posts: 1402
Joined: Mon Aug 30, 2010 5:56 am
Location: Palm Bch Gardens Fl
Contact:

Re: Rolling dice

Post by Largemouthlou »

I like!! Thanks
1250 hypertherm
4 X 8 Precision Plasma
CandCnC electronics
User avatar
larrycameron44
3.5 Star Member
3.5 Star Member
Posts: 579
Joined: Sun Oct 31, 2010 4:12 pm
Location: Auckland New Zealand

Re: Rolling dice

Post by larrycameron44 »

HellfireOffroad wrote:A quick rolling dice file I put together. I haven't had the chance to cut,bend and weld this up yet, Hope to this weekend.
Cool thanks, but I think you need to swap the holes around as all opposite numbers on a dice should equal 7 :D
Larry NZ
pete4477
2 Star Member
2 Star Member
Posts: 51
Joined: Thu Feb 28, 2013 4:40 pm

Re: Rolling dice

Post by pete4477 »

It won't open in Autocad 2011
MetalTorcher
3 Star Member
3 Star Member
Posts: 450
Joined: Sun Sep 08, 2013 2:17 pm
Location: Manitoba

Re: Rolling dice

Post by MetalTorcher »

pete4477 wrote:It won't open in Autocad 2011
Will this dxf open, it's the same as the other one, only imported into pcam and exported as dxf again.
rolling dice.dxf

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

Jason Lyon
PlasmaCAM DHC2
Advanced DesignEdge
Hypertherm Powermax 1000
Duramax mini torch with Snap n Cut
Everlast PowerMTS 251si
Torturing metal since 2014
User avatar
HammerDownJustin
3.5 Star Member
3.5 Star Member
Posts: 613
Joined: Mon Mar 04, 2013 10:41 pm
Location: Paradise,Tx

Re: Rolling dice

Post by HammerDownJustin »

Opens in Corel just fine
Home built 5x10 table CandCNC electronics
Miller 251 Mig
And lots of other cool stuff...
Largemouthlou
4 Star Member
4 Star Member
Posts: 1402
Joined: Mon Aug 30, 2010 5:56 am
Location: Palm Bch Gardens Fl
Contact:

Re: Rolling dice

Post by Largemouthlou »

larrycameron44 wrote:Cool thanks, but I think you need to swap the holes around as all opposite numbers on a dice should equal 7 :D
Larry NZ
So you would move 2 up and the 6 down??

Both files opened in autocad13
1250 hypertherm
4 X 8 Precision Plasma
CandCnC electronics
bigjondrags
2 Star Member
2 Star Member
Posts: 59
Joined: Sat Aug 31, 2013 1:40 pm

Re: Rolling dice

Post by bigjondrags »

Here is my version
3d Dice.dxf

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

bigjondrags
2 Star Member
2 Star Member
Posts: 59
Joined: Sat Aug 31, 2013 1:40 pm

Re: Rolling dice

Post by bigjondrags »

its set up to be easy to bend
38 Special
2 Star Elite Contributing Member
2 Star Elite Contributing Member
Posts: 51
Joined: Fri Dec 18, 2009 8:12 pm

Re: Rolling dice

Post by 38 Special »

Pic of last posted:

Image
Arnos
1/2 Star Elite Contributing Member
1/2 Star Elite Contributing Member
Posts: 6
Joined: Sat Nov 03, 2018 11:36 am

Re: Rolling dice

Post by Arnos »

What thickness steel is everyone using for the dice?
plasmanewbie
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 2567
Joined: Thu Jul 24, 2008 11:15 am

Re: Rolling dice

Post by plasmanewbie »

These are cool! Thanks for digging up this thread, I have yet to see this one! Happy Thanksgiving!!
RONWB
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 370
Joined: Sun Jul 13, 2014 12:49 pm

Re: Rolling dice

Post by RONWB »

thanks
Post Reply

Return to “DXF & SVG Plasma Cutting File Sharing Forum”