Easyscriber engrave attachment for Hypertherm torch's
 

Corner Weld Jigs

DXF Art Sharing Forum is for sharing dxf, plt, or any other vector file for plasma cutting. Browse what others have posted or post some DXF art files of your own.
Post Reply
vanhulagen
Posts: 16
Joined: Sun Jan 16, 2011 3:20 am

Corner Weld Jigs

Post by vanhulagen » Sun Jan 14, 2018 4:55 am

corner welding jigs i drew it for 3/16

Image
Image
corner1.dxf
corner2.dxf
corner3.dxf

You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members. Click Here


oldironrep
Posts: 38
Joined: Mon Sep 14, 2015 10:34 am

Re: corner weld jigs

Post by oldironrep » Sun Jan 14, 2018 8:16 am

Thanks. Any good welders on here have any tips on welding sequence so it doesn't twist like a pretzel? My brain usually tells me the exact opposite way to weld it.

User avatar
Scratch
Elite Contributing Member
Elite Contributing Member
Posts: 505
Joined: Tue Sep 01, 2009 9:07 pm
Location: Hudson,WI
Contact:

Re: corner weld jigs

Post by Scratch » Sun Jan 14, 2018 9:05 am

oldironrep wrote:Thanks. Any good welders on here have any tips on welding sequence so it doesn't twist like a pretzel? My brain usually tells me the exact opposite way to weld it.
Here's a good video on a build of a similar one.

https://m.youtube.com/watch?v=_-JlHM_EWf4
I think I'm the oldest 10 year old boy on the forum...

Bradley
Posts: 61
Joined: Mon Jul 14, 2014 9:37 pm

Re: corner weld jigs

Post by Bradley » Sun Jan 14, 2018 4:36 pm

Maybe tig weld just the outside tab inserts, then lay a piece of one inch over it and clamp it down till it cools, it shouldnt twist that bad, if you dont have any one inch, use some aluminum 1/4 plus thick and clamp it to a table, it will draw the heat out quicker.

vanhulagen
Posts: 16
Joined: Sun Jan 16, 2011 3:20 am

Re: corner weld jigs

Post by vanhulagen » Sun Jan 14, 2018 10:12 pm

Bradley wrote:Maybe tig weld just the outside tab inserts, then lay a piece of one inch over it and clamp it down till it cools, it shouldnt twist that bad, if you dont have any one inch, use some aluminum 1/4 plus thick and clamp it to a table, it will draw the heat out quicker.
thats what i wasgoing to do just weld the outside off the tabs and maybe tac the ends

vanhulagen
Posts: 16
Joined: Sun Jan 16, 2011 3:20 am

Re: corner weld jigs

Post by vanhulagen » Mon Jan 15, 2018 2:35 am

hears in adjustable one

Image
cornerajust1.dxf
cornerajust2.dxf
cornerajust3.dxf

You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members. Click Here


motoguy
Elite Contributing Member
Elite Contributing Member
Posts: 1096
Joined: Tue Aug 25, 2015 12:05 pm
Location: Central MO, USA

Re: corner weld jigs

Post by motoguy » Mon Jan 15, 2018 8:04 am

These should come in handy. Thanks!
Bulltear 6x12 w/ Proton Z axis & watertable
CommandCNC/Linux w/ Ohmic & HyT options
Hypertherm Powermax 85 w/ machine torch
Solidworks, Coreldraw X7, Inkscape, Sheetcam

User avatar
TimP
Posts: 81
Joined: Sat Jan 31, 2015 2:42 pm
Location: Tyler, TX, USA

Re: Corner Weld Jigs

Post by TimP » Mon Jan 15, 2018 12:33 pm

Thank you for the share!
A nice addition to the welding table.

Tim

techno
Posts: 70
Joined: Sun Dec 17, 2017 2:38 pm

Re: Corner Weld Jigs

Post by techno » Tue Jan 16, 2018 9:20 am

Thanks for sharing.

BILLETMAN
Posts: 129
Joined: Fri Jul 26, 2013 4:56 pm

Re: Corner Weld Jigs

Post by BILLETMAN » Wed Jan 31, 2018 3:47 pm

thanks guys great ideas

james.davis
Elite Contributing Member
Elite Contributing Member
Posts: 864
Joined: Mon May 21, 2012 3:58 pm
Location: spanaway wa.

Re: Corner Weld Jigs

Post by james.davis » Wed Jan 31, 2018 4:25 pm

look up back step welding
Jim

User avatar
Capstone
Elite Contributing Member
Elite Contributing Member
Posts: 1019
Joined: Fri Sep 13, 2013 8:42 am
Location: Washington D.C. Metro
Contact:

Re: Corner Weld Jigs

Post by Capstone » Wed Jan 31, 2018 5:37 pm

I made up a pair of these... thanks for the share. check out my Instagram for a pic.
Phil
It's all relative...
CNC Metal Design
Instagram CNC Metal Design
JD Squared 4x8
HT PM45, Miller 251 MIG

User avatar
steel 35
Elite Contributing Member
Elite Contributing Member
Posts: 598
Joined: Sun Jan 11, 2015 11:12 am
Location: N of Cali.

Re: Corner Weld Jigs

Post by steel 35 » Wed Jan 31, 2018 7:29 pm

Shaweet
PPL HDG 4X8
Hyp 65 duramax's
C&CNC 620-5 Ethernet
Inkscape, Solid Edge, Sheetcam, Autocad 2K
Corel X7 Student NO DXF!

User avatar
steel 35
Elite Contributing Member
Elite Contributing Member
Posts: 598
Joined: Sun Jan 11, 2015 11:12 am
Location: N of Cali.

Re: Corner Weld Jigs

Post by steel 35 » Wed Jan 31, 2018 7:32 pm

Except know I need a scribe!
PPL HDG 4X8
Hyp 65 duramax's
C&CNC 620-5 Ethernet
Inkscape, Solid Edge, Sheetcam, Autocad 2K
Corel X7 Student NO DXF!

fasteddie
Posts: 16
Joined: Fri Feb 27, 2015 4:34 pm

Re: Corner Weld Jigs

Post by fasteddie » Sat Mar 10, 2018 12:17 am

Thanks, I have been wanting a set of these.

fasteddie
Posts: 16
Joined: Fri Feb 27, 2015 4:34 pm

Re: Corner Weld Jigs

Post by fasteddie » Sat Mar 10, 2018 12:18 am

Thanks, Very nice.

Post Reply