rapid movement speed setting
-
trucks1948
- 3 Star Elite Contributing Member
- Posts: 440
- Joined: Sat Jun 13, 2009 10:00 am
- Location: Friendship,Wi
rapid movement speed setting
How do i set the speed for the rapid movement?Thanks Jim
-
jmsrbrt
- 3 Star Member
- Posts: 385
- Joined: Mon Dec 08, 2008 5:24 pm
- Location: San Marcos, TX
- Contact:
Re: rapid movement speed setting
What equipment do you have?
Torchmate 2 with ATHC & Water table
Corel 12, Turbo Cad
TD Cutmaster 51
San Marcos, Texas
Corel 12, Turbo Cad
TD Cutmaster 51
San Marcos, Texas
-
tcaudle
- 4 Star Elite Contributing Member
- Posts: 1364
- Joined: Tue Feb 28, 2012 6:47 pm
Re: rapid movement speed setting
You don't
Rapid means move as fast as the machine will go. You defined that number when you did the motor tuning (Velocity)
The F command (feedrate) only sets the speed during a cut (G01, G02. G03 type moves)
A G00 is full speed (max velocity)
You can set the rapid height in SheetCAM
Rapid means move as fast as the machine will go. You defined that number when you did the motor tuning (Velocity)
The F command (feedrate) only sets the speed during a cut (G01, G02. G03 type moves)
A G00 is full speed (max velocity)
You can set the rapid height in SheetCAM
