Lead Ins & Start Points

SheetCam related questions and tips can be posted here
Post Reply
Charlene
3 Star Member
3 Star Member
Posts: 470
Joined: Thu Mar 03, 2011 12:06 am
Location: Maine

Lead Ins & Start Points

Post by Charlene »

Alright, I imported this file into Sheetcam and everything was reversed. The lead ins are on the outside when they should be on the inside, cutting in the wrong direction, etc. It was created in CorelDraw x5. I have tried simply clicking on the "Reverse Cut Direction" but I can't get the lead-ins to change sides. :?: :?: :shock:

Any help would be greatly appreciated!
Attachments
Cocker Spaniel house numbers 1.dxf
(124.04 KiB) Downloaded 99 times
muzza
4 Star Member
4 Star Member
Posts: 1472
Joined: Wed Feb 04, 2009 5:35 pm

Re: Lead Ins & Start Points

Post by muzza »

Charlene,
In Sheetcam go down to Operations, then on Contour Method change offset from outside to inside or visa versa
Murray
Charlene
3 Star Member
3 Star Member
Posts: 470
Joined: Thu Mar 03, 2011 12:06 am
Location: Maine

Re: Lead Ins & Start Points

Post by Charlene »

Thanks Mirth, I will give that I try.
User avatar
trucks1948
3 Star Member
3 Star Member
Posts: 440
Joined: Sat Jun 13, 2009 10:00 am
Location: Friendship,Wi

Re: Lead Ins & Start Points

Post by trucks1948 »

I also use corel x5 and when i import into sheetcam ever so often it changes the lead ins from inside top out.
Post Reply

Return to “SheetCam”