New jet tools / edit jet tools
I wanted to edit and also create a new jet to cut 14ga.
Someone sent me a picture of their sheetcam jet tool layout so I went to edit my tool and found that the jet tool screen options are different.
The one I was sent had a lot more options than my sheetcam tool setup did.
I have attached two pictures.
One pictures shows the screen sent to me that has more options.
Second picture is the screen from my sheetcam that has less options.
Jet Tool- Options
-
4x8_Plasma
- 1/2 Star Member
- Posts: 6
- Joined: Mon Oct 14, 2019 5:26 pm
Jet Tool- Options
- Attachments
-
-
-
djreiswig
- 4.5 Star Elite Contributing Member
- Posts: 1936
- Joined: Thu Nov 19, 2015 10:02 pm
- Location: SE Nebraska
Re: Jet Tool- Options
If you're using a different post processor there could be more or less settings in the tools. It looks like the second picture is probably using a CandCNC post.
2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
-
acourtjester
- 6 Star Elite Contributing Member
- Posts: 7784
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: Jet Tool- Options
Could it be the top is from Linux I looked at both TNG and Developer versions in windows
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
