It is currently Sun Nov 18, 2018 1:19 am

 

post prossesor in sheetcam for THC with Ohmic

Post your questions or tips on SheetCam software in this topic.
ironridge
Posts: 2
Joined: Sun Jul 15, 2018 5:56 pm

post prossesor in sheetcam for THC with Ohmic

Postby ironridge » Sun Jul 15, 2018 6:21 pm

I running sheet cam and mach3. I have recently set up a ohmic sensor to use to detect top of sheet metal for my plasma prior to each pierce, and it works great. The only issue that I have now is since I change to post processor "Mach 3flame with THC" to do the zero ref. I can not go and run from a certain line number if something went wrong such as a miss fire on plasma in Mach3. Before I user just "mach3 " post processor and if I need to run from any line I could just pick run from line # and would start from there with no issues. Is there a better post processor I should be using? Thanks in advance for any help.

User avatar
East German
Elite Contributing Member
Elite Contributing Member
Posts: 405
Joined: Sat Jan 05, 2013 8:21 am
Location: Stapelburg Germany

Re: post prossesor in sheetcam for THC with Ohmic

Postby East German » Mon Jul 16, 2018 3:19 pm

Hello,

I also had the problem. Guilt was with me the G31for the touch off.
I use the G28.1that works with me!
Start from here is not a Problem.

Peter
Sorry for my language! The last English class was in 1982.

Homemade CNC Plasma-Watertable with Mach 3
Triple Beast + Leadschine Drive
Hypertherm Powermax 85
Machine Torch + PriceCNC THC
Hypertherm Powermax 1100
Machine Torch + Proma THC

ironridge
Posts: 2
Joined: Sun Jul 15, 2018 5:56 pm

Re: post prossesor in sheetcam for THC with Ohmic

Postby ironridge » Tue Jul 17, 2018 10:24 pm

Thanks. How do I go about changing from the g31 to a 28.1. Is there a other post processor or you edit a post processor? New at this so unsure best way yet to change and try.

User avatar
East German
Elite Contributing Member
Elite Contributing Member
Posts: 405
Joined: Sat Jan 05, 2013 8:21 am
Location: Stapelburg Germany

Re: post prossesor in sheetcam for THC with Ohmic

Postby East German » Wed Jul 18, 2018 1:30 am

Hello,

Post Processor DTHC-HYT-TAP_SoftPierce+Marker-rev 11J

from the CandCNC website is very good!

https://www.candcnc.com/downloads/

Peter
Sorry for my language! The last English class was in 1982.

Homemade CNC Plasma-Watertable with Mach 3
Triple Beast + Leadschine Drive
Hypertherm Powermax 85
Machine Torch + PriceCNC THC
Hypertherm Powermax 1100
Machine Torch + Proma THC


Return to “SheetCam”

Who is online

Users browsing this forum: No registered users and 1 guest

Easyscriber engrave attachment for Hypertherm torch's