Easyscriber engrave attachment for Hypertherm torch's
 

Open paths are being closed

Post your questions or tips on SheetCam software in this topic.
Post Reply
RAD
Posts: 80
Joined: Fri Aug 28, 2015 3:17 pm

Open paths are being closed

Post by RAD » Sat May 13, 2017 9:17 pm

Opens are being closed what can be causing this?

You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members. Click Here

D.I.Y 4x4 CNC Plasma Table with water tray
60 Gal. A/C + D.I.Y Aftercooler + Water/Oil seperator + Desicant air dryer
45XP (CPC with hand torch)
MiniTHC
UCCNC + Sheetcam + Inkscape / AutoCAD

RAD
Posts: 80
Joined: Fri Aug 28, 2015 3:17 pm

Re: Open paths are being closed

Post by RAD » Sat May 13, 2017 9:58 pm

Ok found the problem: overcut should be set to 0" for open paths
D.I.Y 4x4 CNC Plasma Table with water tray
60 Gal. A/C + D.I.Y Aftercooler + Water/Oil seperator + Desicant air dryer
45XP (CPC with hand torch)
MiniTHC
UCCNC + Sheetcam + Inkscape / AutoCAD

jakeg
Posts: 46
Joined: Fri Jun 17, 2016 8:14 pm

Re: Open paths are being closed

Post by jakeg » Sat Jun 17, 2017 8:53 am

Carefully continue to read all the options. Off set open paths and lead in on open paths is checked

User avatar
acourtjester
Elite Contributing Member
Elite Contributing Member
Posts: 3268
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: Open paths are being closed

Post by acourtjester » Sat Jun 17, 2017 10:09 am

If I am cutting lines (open paths) I use "no offset" and no lead ins.
DIY 4X4 Plasma/Router Table
CandCNC DTHC-IV & Feather Touch
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PM 256 tig

Post Reply