Update cant post process

SheetCam related questions and tips can be posted here
Post Reply
Posts: 1
Joined: Mon Mar 22, 2021 7:52 pm

Update cant post process

Post by Henleynetals » Mon Mar 22, 2021 8:01 pm

Hello, I have a wrightcnc machine running inkscape > sheetcam > mach 3. I ran into a problem that loading gcode would only bring up a small amount of drawing in mach tested old files worked fine decided to download sheetcam and mach on main computer and files worked fine decided to bring shop computer in do updates on sheetcam and mach3 after sheetcam updated it will not post process if there is an operation any ideas?

Les Newell
Posts: 152
Joined: Tue Mar 22, 2016 10:30 am

Re: Update cant post process

Post by Les Newell » Tue Mar 23, 2021 7:38 am

Some Wright CNC machines were supplied with copied licenses which no longer work. Could you send me your license serial number in a PM or email.

Posts: 1
Joined: Fri Apr 02, 2021 9:45 pm

Re: Update cant post process

Post by evrgrounded » Fri Apr 02, 2021 10:01 pm

i'm having the same issue.

I have a Wright cnc Plasma table with SheetCam and Mach3 and everything was working fine, until I updated sheetCam.
Now SheetCam will Not allow me to "run post processor".
I tried contacting Wright cnc, but it look like there phone number are disconnected and they are not replying to Tech Support email, only Sales.
any help will be appreciated
also, looking to see if anyone in San Diego,CA. has a Wright cnc plasma table or knowledge on sheetcam and mack3. i have a couple more issues that i will like to discuss.


Post Reply

Return to “SheetCam”

Industry Pros use FastCut CNC