Starfire post processor

Post your questions or tips on SheetCam software in this topic.
Post Reply
brunnbauer
Posts: 2
Joined: Thu Oct 29, 2020 9:42 am

Starfire post processor

Post by brunnbauer » Thu Oct 29, 2020 10:06 am

Hello,
i have a starfire (CC-S3C) controller of my palsma cutting machine.

I search a "Post Processor" for sheetcam with nc output .cnc

Can does anyone have that?

Best Regards,

34by151
Posts: 8
Joined: Thu May 10, 2018 4:34 pm

Re: Starfire post processor

Post by 34by151 » Thu Oct 29, 2020 4:14 pm

I have the Start CC-M3 and I think this is the same as yours
If you want copy my the post file let me know

brunnbauer
Posts: 2
Joined: Thu Oct 29, 2020 9:42 am

Re: Starfire post processor

Post by brunnbauer » Fri Oct 30, 2020 12:57 am

yes please send me the post.

do you also have a THC on your machine?

I have THC SF-HC25K?
Could you still send me your settings on the CC-M3?

34by151
Posts: 8
Joined: Thu May 10, 2018 4:34 pm

Re: Starfire post processor

Post by 34by151 » Fri Oct 30, 2020 2:16 am

My THC is a HYDTHC XPTHC-4

http://www.hydcnc.com/

My table is a panther plasma/router
https://pantherengineering.trado.com.au ... dlIjoiMyJ9

Dfabltd
Posts: 14
Joined: Sun Oct 27, 2019 2:47 am

Re: Starfire post processor

Post by Dfabltd » Thu Nov 19, 2020 4:40 pm

Being very blunt starfire is an awful control system, ive had 2 machines with it have gutted the second plasma and completly rewird it and uccnc software and hardware

Post Reply

Return to “SheetCam”

Industry Pros use FastCut CNC